пятница, 30 октября 2015 г.

The Single Best Hamstring Exercise / 4 Tips to Maximize the Glute-Ham Raise

 

The-single-best-hamstring-exercise

Here's what you need to know...

  1. Make the glute-ham raise more effective by changing the pivot point from your thighs to the knees to increase muscle activation.
  2. Increase the difficulty of the glute-ham raise by lowering yourself for a 10-count and following it up with 6-8 full reps.
  3. Do rebound glute-ham raises by violently contracting your hamstrings to pull yourself back up to the start position.
  4. Post activation potentiation (PAP) increases power and explosiveness. Take advantage of it by pairing rebound glute-ham raises with Romanian deadlifts.

Maximum Muscle Activation

The hamstrings are the most undervalued and underdeveloped muscles in the body.
Whether you're a weekend warrior or a competitive athlete, your ability to perform explosively and avoid injury will primarily be dictated by how powerful, strong, and well-conditioned your hamstrings are.
Muscle activation is key to increasing the size, strength, and power of the hamstrings. Research has shown that glute-ham raises (along with Romanian deadlifts or RDLs) facilitate the most muscle activation, but the true magic is in how you do them.

Tip 1 – Make Glute-Ham Raises Even Harder

By changing the dynamics of the glute-ham raise and the location of the pivot, we can affect the degree of mechanical advantage, making the exercise easier or harder.
Traditional glute ham machines use the middle of the thigh as a pivot and a first-class lever to increase the mechanical advantage of the movement. This version requires less muscle activation.
A hybrid glute ham machine, on the other hand, starts as a first-class lever to provide just enough mechanical advantage to start the movement.
As the glute-ham raise is performed, the pivot moves from the thigh to the knee, creating a third-class lever decreasing the mechanical advantage, which requires significantly more muscle activation to complete the movement.
More muscle activation equals bigger, stronger, and more powerful hamstrings.
Chances are your gym doesn't have a hybrid glute ham machine. You'll need to make do by simply adjusting the conventional glute-ham raise by moving the footrests closer to the supportive pad, which will force you to take a "higher" position.
One warning, though, this position might cause considerable discomfort to the area just above your knees (there's less muscle there) so you might want to fold up a yoga mat and place it between your knees and the pad for some extra cushioning.

Tip 2 – Use Slow Negatives

Muscles are approximately 40% percent stronger during eccentric contractions - when you lower your body on the GHR - than during concentric contractions when you pull yourself up. So start at the top of the glute-ham raise and lower yourself to a 10-count at a consistent pace.
Once you come within a few degrees of extension, do 6-8 full range-of-motion reps. If you're feeling strong, repeat that sequence. If you're feeling super strong, repeat the sequence again!

Tip 3 – Add a Plyometric-Like Movement

Plyometrics are effective because they take advantage of the stretch-shortening cycle (SSC).
Organs at the insertion points of muscles leading into tendons sense the rate and magnitude of a stretch on a muscle. When a violent stretch is detected, muscles respond by producing more force than they'd be able to during either a concentric or eccentric movement.
To take advantage of this phenomenon, incorporate a rebound glute-ham raise.
Starting at the top of the glute-ham raise movement, completely relax your hamstrings, and allow gravity to pull your body down and forward. When you come within a few degrees of extension, violently contract your hamstrings and pull yourself back to the top/start of the movement as quickly as possible.
In general, stick to sets of 6 reps or less.
Effectively performing the rebound glute-ham raise movement requires an excellent mind-muscle connection. This movement is generally reserved for more advanced athletes because it requires a high level of neuromuscular control.

Tip 4 – Pair Exercises

Pairing rebound glute-ham raises with exercises like RDLs takes advantage of a principle known as Post Activation Potentiation, or PAP, which allows you to perform movements even more explosively.
For example, research has shown that we can improve our jump height if we perform heavy back squats before jumping. The combination of heavy resistance training and a plyometric movement leads to greater improvements than either component performed on its own.
The great thing about the PAP response is that it lasts approximately 4 minutes, with the effect disappearing completelyafter 16 minutes.
To take advantage of PAP, do a set of 6 rebound glute-ham raises and then, within a couple of minutes, follow them up with a set of 8-10 RDLs.
More isn't always better with plyometrics. A day a week will probably work as well as 2 or 4 days a week.

четверг, 29 октября 2015 г.

СХЕМА НАКАЧКИ НОГ.





Наша цивилизация внесла в телосложение солидные правки. Одна из них - повальная сутулость, другая - ослабевшие руки (у мужчин и женщин), третья - дистрофия бицепсов бедер. О последнем как раз и поговорим. Массовый переход к сидячей работе привел к тому, что значительную часть дня человек проводит с согнутыми коленями. (Бездействия ног - это другая большая проблема.) Когда ваше колено согнуто, бицепс бедра укорачивается и, лишенный всякой нагрузки, безвольно провисает. Со временем он теряет всякий тонус и начинает "усыхать" - терять объем. Больше того, поскольку бицепс не испытывает продольной растягивающей нагрузки, он начинает укорачиваться, что приводит к ограничению амплитуды многих движений, в частности, наклонов и приседаний. Если каких-нибудь 30 лет назад приоритетной целью считался квадрицепс, и культуристы истово приседали, то в наши дни такая методика, скорее, приведет к травме, поскольку еще больше усугубит дисбаланс между относительно сильным квадрицепсом и дистрофичным бицепсом бедра. Вывод? Качать ноги нужно по-новому! Упор делайте на бицепс бедра! Ну а что сегодня? Обычно бицепсам бедер отводят пару изолирующих упражнений в конце "ножной" тренировки после приседаний и жимов ногами. И вот что смешно! Вы никогда не сумеете раскачать квадрицепс, имея слабые бицепсы бедер, поскольку в тех же приседах бицепсы бедер являются главной тяговой силой наравне с квадрицепсом! Короче, вот вам "правильная" схема накачки ног. Действуйте!

Комплекс бицепс бедер
1. Сгибания ног лежа - 3 подхода по 12 повторений
2. Румынская становая с гантелями - 4 подхода по 10-12 повторений
3. Обратные гиперэкстензии - 3 подхода до отказа
4. Широкие приседы в Смите - 4 подхода по 10-12 повторений
5. Жим ногами - 4 подхода по 10-12 повторений
6. Разгибания ног - 3 подхода по 12 повторений

Не включать разминочные сеты. Выберите такой вес отягощения, которым позволит вам выполнить все заданные повторы идеально чисто. По мере роста силы, повышайте рабочие веса.

1. БИЦЕПСЫ БЕДЕР
СГИБАНИЯ НОГ ЛЕЖА
ЦЕЛЕВЫЕ МЫШЦЫ - БИЦЕПСЫ БЕДЕР
СЕТЫ+ПОВТ. 1 РАЗМИНОЧНЫЙ СЕТ. 3 РАБОЧИХ СЕТА ПО 12 ПОВТОРОВ

» ОПИСАНИЕ: Многие применяют это упражнение, как главное для накачки бицепсов бедер, однако таковым оно быть не может. Это относительно легкое изолирующее упражнение, которое не способно дать бицепсам бедер достойной нагрузки. Данное упражнение служит всего лишь глубокой разминкой перед базовой румынской становой тягой.

» СТАРТ: примите положение лежа на скамье тренажера лицом вниз. Заведите лодыжки под опорные валики. Прочно возьмитесь за рукояти, чтобы стабилизировать положение корпуса (А). Голову держите прямо, не откидывайте ее назад в такт движениям ног.

» ВЫПОЛНЕНИЕ: Изолированным усилием бицепсов бедер подтяните валики к ягодицам, как можно ближе. Но не допускайте отрыва таза от скамьи (В). В верхней точке сделайте паузу, чтобы продлить пиковое напряжение бицепсов бедер, и только потом возвращайтесь в исходное положение. В нижней позиции не опускайте отягощение на опору, держите его на весу.

А. В нижней позиции не распрямляйте колени полностью. Держите их согнутыми.

В. Когда подтягиваете валики к бедрам, тотчас остановитесь, если ваш таз непроизвольно приподнимается над скамьей. Ограничьте амплитуду, чтобы не допустить подъема таза, угрожающего травмой поясницы.

Сгибание ног лежа

2. БИЦЕПСЫ БЕДЕР
РУМЫНСКАЯ СТАНОВАЯ ТЯГА С ГАНТЕЛЯМИ
ЦЕЛЕВЫЕ МЫШЦЫ - БИЦЕПСЫ БЕДЕР + ЯГОДИЦЫ
СЕТЫ+ПОВТ. - 4 РАБОЧИХ СЕТА ПО 12. 8, 8, 10 ПОВТОРОВ

» ОПИСАНИЕ: Возможно, вы уже делали румынскую становую тягу со штангой или в тренажере Смита. Однако вариант с гантелями более эффективен, и вы это сразу почувствуете! Особенно важно то, что гантели переносят акцент на верхнюю область бицепсов бедер, где они сочленяются с ягодицами. Эта область обычно является слабым местом, поскольку штанга преимущественно нагружает центральную область бицепсов бедер. Когда вы дойдете до тяжелых гантелей, примените кистевые ремни.

» СТАРТ: Встаньте прямо, удерживая гантели в прямых руках (А). Колени чуть согните. Ступни поставьте на ширину плеч. Наполните грудную клетку глубоким вдохом.

» ВЫПОЛНЕНИЕ: Удерживая спину прямой, медленно наклоните корпус. Гантели при этом должны "скользить" вдоль ваших ног. Когда гантели окажутся на середине голеней, замрите (В). Из этой позиции за счет изолированного усилия бицепсов бедер и ягодиц медленно выпрямитесь. В исходном положении не распрямляйте колени "в замок".

А. Ноги в течение всего сета нужно держать прямыми, однако не распрямляйте колени "в замок". Держите их чуть согнутыми. Жестко распрямленный коленный сустав будет испытывать большую травмоопасную нагрузку.

B. Опускайте гантели примерно до середины голени. Спину при этом держите подчеркнуто прямой.

Румынская становая тяга с гантелями

3. БИЦЕПСЫ БЕДЕР
ОБРАТНЫЕ ГИПЕРЭКСТЕНЗИИ
ЦЕЛЕВЫЕ МЫШЦЫ - БИЦЕПСЫ БЕДЕР
СЕТЫ+ПОВТ. - 3 СЕТА ДО ОТКАЗА

» ОПИСАНИЕ: Это еще одно упражнение для бицепсов бедер, которое фокусирует нагрузку на их верхней области. Данное упражнение обычно выполняется последним и делается до отказа. Между ступней можно зажать небольшую гантель или утяжеленный мяч.

» СТАРТ: примите обратное положение на скамье для традиционных гиперэкстензий. Край скамьи должен приходиться на низ пресса. "Переломите" тело точно в области тазобедренных суставов, опустив прямые ноги к полу (А). Крепко возьмитесь руками за тренажер, чтобы упрочить положение тела.

» ВЫПОЛНЕНИЕ: Изолированным усилием бицепсов бедер и ягодиц поднимите прямые ноги кверху "в линию" с корпусом. Ступни плотно сжаты, колени чуть согнуты (В). Поднимайте ноги медленно, чтобы исключить рывковую инерцию, которая может травмировать поясницу. В верхней точке сделайте паузу, чтобы продлить пиковое напряжение бицепсов бедер и ягодиц, и только потом возвращайтесь в исходное положение. В нижней позиции не опускайте ступни на пол, держите их на весу.

А. Верхний край скамьи должен приходиться на нижнюю область пресса, чтобы обеспечить изолированную работу тазобедренных суставов.

В. Не задирайте голову вверх в такт подъемам ног. Держите голову прямо и неподвижно.

Обратные гиперэкстензии

4. КВАДРИЦЕПСЫ
ШИРОКИЕ ПРИСЕДАНИЯ В СМИТЕ
ЦЕЛЕВЫЕ МЫШЦЫ - КВАДРИЦЕСЫ + ЯГОДИЦЫ + БИЦЕПСЫ БЕДЕР
СЕТЫ+ПОВТ. - А СЕТА ПО 12, 8, 8, 10 ПОВТОРОВ
» ОПИСАНИЕ: Когда паши ноги уже порядком устали, приседания становятся рискованными, и их лучше делать в тренажере Смита. Если выполнять приседы в обычной манере, когда ступни стоят на ширине плеч, то приседы в Смите будут нагружать ваши квадрицепсы. Однако если вы расставите ноги крайне широко, на всю ширину силовой рамы, упражнение становится уникальным. Оно одновременно нагружает все мышцы ног: квадрицепсы, ягодицы и бицепсы бедер! Понятно, что приседы с такой широкой постановкой ног со штангой невозможны.

» СТАРТ: Установите гриф штанги на высоте чуть ниже ваших плеч. Широко расставьте ступни. Подсядьте под гриф и примите штангу на плечи. Возьмитесь за гриф широким прочным хватом. Распрямите колени и выпрямитесь (В).

» ВЫПОЛНЕНИЕ: Наполните грудную клетку мощным вдохом и медленно опуститесь в присед до параллели бедер с полом (А). Не наклоняйте корпус вперед! Держите спину прямой! Из нижней позиции мощно выжмите себя кверху, распрямляя ноги.

А. Ширина постановки ступней ограничена гибкостью ваших тазобедренных суставов. Поначалу выберите такую ширину стойки, которая вам удобна. Постепенно расширяйте стойку.

В. В верхней позиции не распрямляйте колени "в замок".

Широкие приседания в смите

5. КВАДРИЦЕПС
ЖИМ НОГАМИ
ЦЕЛЕВЫЕ МЫШЦЫ - КВАДРИЦЕПСЫ
БИЦЕПСЫ БЕДЕР И ЯГОДИЦЫ АССИСТИРУЮТ
СЕТЫ+ПОВТ. - 4 СЕТА ПО 12, 8, 8, 10 ПОВТОРОВ

» ОПИСАНИЕ: Это упражнение выполняют с узкой постановкой стоп. Причем, чем плотнее стоят ступни, тем выше нагрузка на квадрицепсы. В нашем случае нужно, наоборот, расставить ступни пошире. Это приведет к повышению нагрузки на бицепсы бедер и ягодицы. Ступни вдобавок нужно поставить к самому верхнему краю платформы. Это еще больше повысит нагрузку на эти мышцы.

» СТАРТ: Примите положение сидя в тренажере для жима ногами. Прочно возьмитесь за боковые рукояти. Ступни поставьте широко у верхнего края платформы. Носки ступней разверните наружу (А).

» ВЫПОЛНЕНИЕ: Упираясь в платформу пятками, медленно выжмите платформу на прямые ноги. Колени не распрямляйте "в замок", держите их чуть согнутыми. Медленно вернитесь в исходное положение (В).

А. В конечной позиции не распрямляйте колени "в замок". Это травмоопасно. Держите колени чуть согнутыми.

В. Широкая амплитуда может сыграть с вами злую шутку. Приведение коленей к самой груди сопровождается отрывом таза от скамьи, что травмоопасно для поясницы. Контролируйте амплитуду, чтобы не допустить смещения таза.

Жим ногами

6. КВАДРИЦЕПСЫ
РАЗГИБАНИЯ НОГ
ЦЕЛЕВЫЕ МЫШЦЫ - КВАДРИЦЕПСЫ
СЕТЫ+ПОВТ. - 3 СЕТА ПО Л 2 ПОВТОРОВ

» ОПИСАНИЕ: Это отличное финальное упражнение для квадрицепсов. Оно носит прицельный характер и одновременно исключает риск травмы по причине усталости. В самом деле, ваши ноги уже устали и любые другие упражнения со свободным весом были бы травмоопасны. Поскольку упражнение носит изолирующий характер, число повторов нужно увеличить до 12-ти.

» СТАРТ: Сядьте на сиденье тренажера и прочно возьмитесь за боковые рукояти. Ступни заведите под подвижные валики. Если их положение подлежит регулировке, установите их так, чтобы на старте ваши колени были согнуты под прямым углом. Голову держите прямо, смотрите перед собой (А).

» ВЫПОЛНЕНИЕ: Изолированным усилием квадрицепсов поднимите валики как можно выше (В). В верхней точке сделайте паузу, чтобы продлить пиковое напряжение квадрицепсов, и только потом возвращайтесь в исходное положение.

А. Изменение позиции носков (внутрь или наружу) меняет нагрузку на квадрицепс. При носках, повернутых внутрь, нагрузка смещается на внутреннюю область квадрицепса, если носки развернуты наружу - на внешнюю.

В. В верхней позиции обязательно делайте статическую паузу, чтобы продлить пиковое напряжение квадрицепсов. Опускайте отягощение медленно и подконтрольно.

10 Best Unilateral Exercises

 

Best-unilateral-exercises

Here's what you need to know...

  1. If you've never built up your single-leg strength, take 6 weeks to bring your unilateral competency up to par.
  2. You can achieve levels of joint torque and muscle activation with unilateral exercises that are similar to double-leg exercise, without all the spinal loading.
  3. Getting stronger at single-leg work will transfer over to bilateral work.
Many lifters write off single-leg exercises as "wussy exercises" because they simply haven't taken the time to get good at them. That's shortsighted. Look, a nice benefit of single-leg exercise is that you can get levels of joint torque and muscle activation that are similar to what you can get with double-leg exercise, but with less spinal loading.
Therefore, unilateral lower body exercises contribute to any good lifter's arsenal. If you're weak at single-leg training, any gains in strength and competency will transfer over to bilateral training. But with so many good exercises to choose from, which single-leg movements reign supreme? Here are the ten best.

1 – Dumbbell Deficit Bulgarian Split Squat

This exercise is an accessory movement for the squat, with the additional benefit of increasing single-leg stability and flexibility throughout a larger range of motion.
Dumbbell Deficit Bulgarian Split Squat 1
Dumbbell Deficit Bulgarian Split Squat 2
  • Create a 2-4" deficit using boards, mats, or aerobics steps.
  • Line up in front of a bench and consider placing an Airex Balance pad (not shown) or some other type of padding on the floor to protect the knee in the bottom range of motion.
  • Hold a pair of dumbbells at your sides. Standing on top of the platform, reach back and place the top of the foot on the top of the bench. The majority of the weight should be kept over the front foot (around 80%), with the additional weight on the rear foot (around 20%).
  • While keeping the torso mostly upright, descend under control until your knee lightly touches the pad.
  • At this point, drive through the heel of the front foot, back to the starting position. Keep a neutral head, pelvis, and spine throughout the range of motion.
  • Don't allow the knee to drift too far in front of the toes or shift from side to side. If you're prone to knee aches and pains, sit back more and maintain a vertical shin throughout the movement.

Common Mistakes:

  • Using a deficit that's too high, which alters technique.
  • Not keeping control throughout the movement.
  • Not touching the pad and skimping on range of motion.
  • Using a bench that's too high, which may cause hip flexor/groin pain.
  • Rising up onto the toes.

2 – Zercher Reverse Lunge

This is an accessory movement for the squat with the additional benefit of increasing single-leg stability and strength. The Zercher position increases the contribution of the upper back (thoracic extension) and anterior core, along with increasing glute activation. Stepping back increases stress at the hips and decreases stress at the knees.
Zercher Reverse Lunge 1
Zercher Reverse Lunge 2
  • Start with the bar in a squat rack or squat stand set at about sternum height.
  • Some people prefer using a bar pad or towel wrapped around the bar to pad the arms. If you have access to a fat bar or axel bar, this is a great time to use it.
  • Maintain a neutral head and spine throughout the lift. Keep the majority of the pressure centered over the front foot throughout the movement.
  • Place the bar in the crook of your arms and interlock the fingers together to create a solid base (or make fists). Unrack the bar and step back.
  • With one leg, step backwards into a reverse lunge, keeping the foot in line with your hip.Do not try to create a straight line between your feet; maintain your normal stance width.
  • Keeping the torso upright (a slight forward lean is fine), descend under control until your knee lightly touches the ground.
  • From this position, drive through the heel of the front foot and return to the starting position. Don't allow the knee to drift too far in front of the toes or shift from side to side.
  • Common Mistakes:

    • Taking too large or too short of a step backward.
    • Not maintaining control throughout the movement.
    • Not touching the ground and skimping on range of motion.
    • Rising up onto the toes.
    • Trying to keep both feet in line with each other instead of under their respective hips, causing an unstable base of support.
    • Trying to return to the start position from the lunge by pushing off the rear leg rather than keeping the majority of the weight over the front foot.

    3 – Front Loaded Forward Lunge

    This is also an accessory movement for the squat with the additional benefit of increasing single-leg stability and strength. The arms position increases the contribution of the upper back and anterior core. Stepping forward increases stress at the knees and decreases stress at the hips.
    Front Loaded Forward Lunge 1
    Front Loaded Forward Lunge 2
    • Start with the bar in a squat rack set at around shoulder height.
    • Use an Olympic style front rack/clean grip position if you have enough flexibility, or you can use a cross-arms position favored by bodybuilders. Maintain a neutral head and spine throughout the lift.
    • Unrack the bar and take a step back.
    • With one leg, step forwards into a lunge, keeping the foot in line with your hip. Don't try to create a straight line between your feet; maintain your normal stance width.
    • While keeping the torso upright or using a slight forward lean, descend under control until your knee touches the ground.
    • From this position, drive through the mid-foot of the front foot and return to the starting position. Don't allow the knee to drift too far in front of the toes or shift from side to side.
    • If you're prone to knee aches and pains, sit back more and maintain a vertical shin throughout the movement.

    Common Mistakes:

    • Taking too large or too short of a step forward.
    • Not maintaining control throughout the movement.
    • Not touching the ground and skimping on ROM.
    • Rising up on the toes.
    • Trying to keep both feet in line with each other instead of under their respective hips, causing an unstable base of support.
    • Trying to return to the start position from the lunge by pushing off the rear leg rather than keeping the majority of the weight over the front foot.

    4 – Single-Leg Romanian Deadlift with Brace

    This one is an accessory movement for the deadlift with the added benefit of increasing single-leg stability and strength in the hamstrings while sparing the spine. The "braced" position allows for a greater load to be used (and greater prime-mover muscle activation) and prevents balance from being the limiting factor of the movement.
    Single-leg Romanian Deadlift with Brace 1
    Single-leg Romanian Deadlift with Brace 2
    • Stand next to a squat rack or other stable object that you can hold onto during the movement.
    • Start with the dumbbell or kettlebell held in the hand that's on the same side as the leg that's going to stay in contact with the ground. Hold onto the rack with the other hand and use this hand sparingly to assist during the movement.
    • Start the movement by reaching rearwards with the opposite leg, trying to touch the wall behind you (sit back just as you would in a bilateral Romanian deadlift).
    • Keep the toes of the rear foot pointed towards the ground and keep the rear leg in line with the torso (keep the hip extended on the rear leg). Maintain a neutral head and spine throughout the lift.
    • Stop the eccentric portion of the movement when the load touches the ground, or as far as your range of motion allows while keeping proper form.
    • Make sure the dumbbell or kettlebell stays close to the body and doesn't drift too far outward.
    • Return to the start position by pulling with the heel of the front foot.

    Common Mistakes:

    • Using the "brace" hand to assist in the lift rather than to just keep stable.
    • Not maintaining control throughout the movement.
    • Skimping on range of motion.
    • Rising up on the toe of the front foot.
    • Allowing the toe of the rear foot to drift out to the side, which in turn opens up the hips and releases tension on the lateral hamstrings.

    5 – Bottoms-Up Single-Leg Foot and Shoulder-Elevated Hip Thrust

    This exercise is an accessory movement for the squat and deadlift with the additional benefit of increasing end range hip extension strength and increasing single-leg stability.
    The shoulder-elevated and foot-elevated position increases the movement's range of motion, leading to greater hamstring activation and strength throughout a larger ROM. The "bottoms-up" position refers to starting the movement from the floor, which allows the lifter to be more comfortable and "reset" before each rep.
    You'll need two objects of about the same height and a surface that won't allow slipping (benches and boxes are often used). The distance between the two objects will vary depending on body type and foot position used. Foot position can be set by personal preference – with mid-foot placed on the corner of the bench or with heel placed on top of the bench.
    Bottoms-up Single-leg Foot and Shoulder Elevated Hip Thrust 1
    Bottoms-up Single-leg Foot and Shoulder Elevated Hip Thrust 2
    • Start with the butt resting on the floor, shoulders/upper back resting on the rear bench, with arms resting out to the sides to increase stability and prevent sliding, and foot placed on the bench in front.
    • Start the movement by driving through the heel and squeezing the glute until full hip extension is reached.
    • Upon reaching full hip extension, pause for 1-2 seconds and return to the starting position.
    • Maintain a neutral head and spine throughout the lift. Keep the opposing hip flexed and knee bent throughout the movement.

    Common Mistakes:

    • Not setting the benches at a proper distance from each other.
    • Excessive arching of the lumbar spine and anterior tilting of the pelvis.
    • Not maintaining control throughout the movement and not pausing at end-range.
    • Skimping on range of motion; not reaching full hip extension.
    • Not driving through the heel of the front foot.

    6 – Single-Leg Prisoner Back Extension

    This is an accessory movement for the deadlift, with the additional benefit of increasing single-leg stability and flexibility. The majority of stress is on the hamstrings and glute of the stance leg.
    This variation doesn't require additional load. Placing the arms in the prisoner position increases the torque loading at the hip by increasing the lever length of the torso's center of mass.
    Single-leg Prisoner Back Extension 1
    Single-leg Prisoner Back Extension 2
    • Set up inside a 45-degree hyper and lock only one leg into the foot pad, with the other leg resting on top of the other side.
    • The upper body should have a neutral spine and tucked chin, with no excessive arching of the low back.
    • Hinge at the hips and lower the upper body without rounding the spine until a stretch is felt in the hamstrings.
    • Ensure that no rotation occurs at the torso throughout the movement.
    • Use the hamstring to pull the torso back in line with the legs and finish with the glutes.

    Common Mistakes:

    • Using spinal flexion and extension instead of hip flexion and extension.
    • Allowing the torso to twist throughout the range of motion.
    • Not finishing with glutes and instead arching the low back excessively to finish off hip extension.

    7 – Pistol Squat with Countermovement

    This is an accessory movement to the squat, with the added benefit of building single-leg stability, strength, and coordination. It places the majority of stress on the quads of the stance leg.
    The "countermovement" aspect makes the movement easier to perform by shifting the center of mass forward, which increases the lever arm of the hip and decreases the lever arm of the knee.
    Pistol Squat with Countermovement 1
    Pistol Squat with Countermovement 2
    • Stand on one leg while holding two light dumbbells (5-10 pounds) at the sides.
    • Sit back onto the heel of the stance leg. The foot should remain flat on the ground and the hip of the free leg should be flexed so it doesn't touch the ground.
    • Get as low as possible while simultaneously raising the dumbbells as you would a front raise, with the goal being "ass to grass."
    • Once the lowest position is reached, drive through the heel and return to the start position.
    • Keep a neutral spine at the top and for the majority of the movement. Some lumbar flexion will likely occur at the very bottom, but try to keep the chest tall and prevent excessive lumbar motion.

    Common Mistakes:

    • Rising up onto the toe of the stance leg rather than staying on the heel.
    • Not going low enough.
    • Rounding the low back excessively at the bottom of the movement.

    8 – Pendulum Quadruped Hip Extension

    This one is an accessory movement for the squat and deadlift with the added benefit of increasing end range hip extension strength and core stability.
    Pendulum Quadruped Hip Extension 1
    Pendulum Quadruped Hip Extension 2
    • Set up underneath a reverse hyper in the quadruped position. (I realize that not many lifters have access to a reverse hyper, but this movement is amazing so I felt obligated to include it.)
    • Place both hands on the bottom rails of the reverse hyper and place one foot on the pendulum so that the middle of the foot is on the plate loader.
    • Grip onto the bottom rails tightly to increase core stability through "irradiation.".
    • Make sure the body is shifted rearward so that the knee of the working leg stays bent while it extends rearward (this is bent-legged hip extension, not a donkey kick), which increases stress on the glutes.
    • Maintain a neutral spine and braced core throughout the motion along with a packed neck – look downward at the floor.
    • Drive the foot on the plate loader back and finish with the glute. Don't go so high that you feel this in your lower back.
    • Control the descent back to the starting position. Don't allow the spine to flex during this portion of the movement.

    Common Mistakes:

    • Substituting back extension for hip extension.
    • Going too heavy and not feeling the glutes as primary hip extensors.
    • Not controlling the weight and using momentum.
    • Extending the lumbar and/or cervical spine excessively.

    9 – Dumbbell Step Up

    This is an accessory exercise for the squat with the additional benefit of building single-leg strength, stability, and coordination. It places stress primarily on the quads and glutes of the stance leg.
    Dumbbell Step-up 1
    Dumbbell Step-up 2
    • Grab two dumbbells and hold at the sides. Maintain tension in the scapulae and don't allow the weight to pull the shoulder blades down passively.
    • Place the stance leg completely on the step so that the heel is on the step.
    • The ideal step height is approximately knee height. (Higher step ups are incredible too and don't require much loading.)
    • Maintain a neutral spine and keep the weight primarily on the top leg. Drive the heel into the step until the leg is straight, finishing with the glutes.
    • On the descent, control the body until the foot touches the ground (don't just free fall downward).

    Common Mistakes:

    • Relying on the rear leg excessively for the production of momentum.
    • Going too heavy and losing alignment or allowing the hips to hike during the movement.
    • Failing to adequately control the descent.
    • Not fully extending the hips at the top and failing to finish with the glutes.
    • Allowing the knee to drift inward during the ascent or descent.
    • Rocking the torso, shrugging the shoulders, and/or raising the hips first to start the motion rather than driving through the heel.

    10 – Dumbbell Skater Squat With Countermovement

    This is an accessory movement for the squat with the benefit of building single-leg strength, stability, and coordination. This variation is easier on the knees than pistol squats and may be used in place of them for those with sensitive knees.
    The "countermovement" aspect makes the movement easier to perform by shifting the center of mass forward, which increases the lever arm of the hip and decreases the lever arm of the knee.
    Dumbbell Skater Squat with Countermovement 1
    Dumbbell Skater Squat with Countermovement 2
    • Stand on one leg while holding onto two light dumbbells.
    • Bend one knee to 90 degrees so that one foot is behind you.
    • Sit back on the heel of the stance leg and lean forward slightly, then begin the descent. Go as low as possible, touching the back knee to an Airex Balance pad or something of similar thickness while simultaneously raising the dumbbells as in a front raise.
    • Maintain a neutral spine while driving through the heel of the stance leg and return to the start position.

    Common Mistakes:

    • Going too heavy and allowing the hips to hike.
    • Rounding the back or leaning forward excessively.
    • Allowing the back leg to drift to either side, causing excessive rotation.
    • Reaching for the ground with the dumbbells rather than maximizing range of motion at the hips.

    Unilateral Kick to the Head

    Most powerlifters need some time away from heavy bilateral lifting throughout the year, so if you've never built up your single-leg strength, take 6 weeks to bring your unilateral competency up to par. Avoid the temptation of going too heavy at first. Pay close attention to form and stability and your strength will rapidly increase.