image
The most common mistakes swimmers make in their strokes are often the easiest to fix. If you’re trying to improve your stroke, here are some tips on how to recognize your mistakes. This guide covers how to correct and improve your backstroke.
1. Head Position: Tucked Chin
A common mistake that you might come across is tucking your chin while swimming backstroke. This forces your head to come high out of the water, creating resistance as you swim.
Another problem you might face: Your body always wants to be in alignment. In other words, your feet want to be under your head.
If you look forward and tuck your chin, your feet want to drop underneath you to the pool floor. It’s nearly impossible to keep your hips afloat if you tuck your chin. If you look up, though, your feet want to be stretched out behind you.
How to Fix
Hot Tip: Balance Your Goggles
If you’re having trouble relaxing your neck, take off your goggles. Place the goggles on your forehead and lightly kick backstroke. Try to keep the goggles balanced on your forehead. In order to keep them there, you’ll have to tilt your head back and relax your neck.
Relax your neck. If you do, your body will straighten out. You’ll notice that your eyes are now looking straight up toward the sky or ceiling. If you have a really bad habit of tucking your chin, try to push your chin up toward the ceiling more. Feel the water start to splash slightly over your forehead.
This sensation can be quite uncomfortable if you’re not used to it. To try it out, start by kicking with your arms at your sides. Relax your neck as you begin to kick. As you become more comfortable with the head position, slowly add in your arms. Keep the tempo slow as you do this.
2. Body Position: Flat Torso
If you’re like many other backstrokers, your shoulders might stay flat in the water as you swim. This can lead to shoulder injury. To pull water in this position, you’ll reach behind you and strain your shoulders. Also, you’re not pulling as much water as you can because your arm is at a poor angle to grip the water.
Instead, you should have an extensive shoulder rotation. Rotating your shoulders will ease any strain while pulling. It will also make your pull stronger, since you’ll be able to get a better catch.
How to Fix
Rotate your hips and shoulders simultaneously. To exaggerate this rotation, try a drill called “Barrel Roll.” Push off the wall and leave your arms at your sides. As you kick, rotate your body from side-to-side like a barrel floating and rolling in the water.
Try to make the transitions are as smooth as possible. Take it slow. As you rotate, tap your shoulder to your chin. This will let you know if you’re rotating as far as you can.
Make sure, though, that you’re keeping your head perfectly still. If you move your head over to your shoulder, you won’t be rotating properly in the water. If you’re not sure if you’re keeping your head still, find a spot in the sky or ceiling to focus on. Keep looking at that spot as you rotate.
3. Legs: Bent Knees
You’ve probably seen someone’s knees breaking the surface of the water while swimming backstroke. Even though it’s easy to see, it hard to feel. Kicking with bent knees is inefficient. Kicking like this creates resistance in the water, creating an inefficient, non-rhythmic stroke.
How to Fix
Keep your legs as straight as you can. Kick from your hips. To practice this, grab a board and hold it over your knees. Keep your arms straight so that you can steady the board, and relax it over your legs. Allow the board to float on the surface of the water as you grip it.
Now push off the wall and start kicking on your back. If you’re bending your knees, you will feel them hit the board. Instead, keep your legs straight, and try to feel your toes coming out of the water. You should be making small, white-water splashes with your toes.
Also, don’t cheat! Many swimmers tend to turn their knees out during this drill to avoid hitting the board. It’s still possible to bend your knees without hitting the board by doing this. Once again, this will lead to an inefficient kick because of an incorrect leg angle. Instead, make sure that your knees are facing straight up toward the board.
4. Arms: Back-hand Entry on the Pull
You might be like many other swimmers by entering your arm into the water with the back of your hand. This doesn’t set you up for a strong pull. After your hand enters, you’ll have to turn your palm out to face the side of the pool. While transitioning, you’ll be slipping water. It’s nearly impossible to get a good catch when entering the water like this.
How to Fix
Enter the water with your pinky facing down. This will turn your palm outward, and set you up for your pull. Practice the “Flag Pole” drill. Push off the wall and begin swimming backstroke. As you ou lift your arm up on your pull, exit the water with your thumb. Reach straight up from your face where you can see your hand, and pause in this “Flag Pole” position. Next watch your hand flip so that your palm is facing outward. Then slice into the water with your pinky first.
5. Timing: Slow Arms
In many swim practices, coaches will tell you to swim a few laps of easy backstroke as a warm-down. Swimmers can get used to cruising through backstroke; making it long, slow, and leisurely. Because of this, many swimmers struggle to speed up their arms in backstroke.
In backstroke, the arms are one of the main sources of power. To maximize the pull, you’ll need to accelerate your arms through the water.
How to Fix
As you place your hand in the water to begin your catch, pull your arm to your hip as quickly as you can. As you do so, try to feel the pull force you onto your side. If you grip the water well enough, it will force you to rotate quickly and powerfully. This will help you speed up the  rate.