четверг, 28 февраля 2013 г.

Подход к тренировкам "сустав-за-суставом". Перевод статьи Майкла Бойля Feb

Пару слов от меня:
Статья полезная и изначально я хотела перевести только её. Но перечитав её после перевода, поняла, что вероятно возникнут вопросы и трактования, на которые авторы уже дали ответы. Эта статья была опубликована в июне 2007 года. И за прошедшие годы были разные мнения, многие высказались по её поводу, многие поняли всё слишком буквально, была и критика и много сторонников и последователей. Я читала и слушала и последующие материалы авторов подхода сустав-за-суставом, где они давали много пояснений и критику, и парочку последователей.
В итоге я понимаю, что после прочтения первоначальной статьи не всё может быть понятно. Эта статья это первая формулировка нового красивого представления, которое удобно использовать в построении тренировок и оценке травм. Но так как это первая формулировка, то, возможно, не всё разложено по полочкам, что-то рассматривается упрощенно, а некоторые вещи даже противоречивы.
И, хотя и эта статья достаточно большая по объему, всё же следом идет вторая часть, посвященная этой же теме, этому же подходу. Так что, если вам эта тема интересна, и прочитав эту статью возникают сомнения или вопросы, то, мне кажется, стоит почитать следом сначала вторую. Там на многое даны ответы и она уже написана с учетом той реакции, которую вызвала эта, первая статья.
Этот подход придумали Майкл Бойль и Грей Кук. Эта статья от Бойля, а вторая будет от Кука. Несмотря на то, что они согласны в базовых принципах, их мнения могут немного отличаться в деталях. О чем, впрочем, они также говорят. В любом случае, оба рассказывают интересные вещи и приводят хорошие примеры. И, несмотря на то, что, эти статьи скорее ориентированны на тренеров, что-то полезное в них можно найти всем, я думаю. В конце концов, часто мы сами себе тренера, реабилитологи, физиотерапевты :)

Далее перевод самой статьи:
(Некоторые видео не получилось найти, некоторые заменены на более менее подходящие. При желании, видео можно посмотреть в исходной статье)



A Joint-by-Joint Approach to Training 
by Michael Boyle

Подход к тренировкам "сустав-за-суставом". Майкл Бойль )



У моего хорошего друга, физиотерапевта Грей Кук (Gray Cook), талант упрощать сложные темы. Я завидую его способности кратко описывать сложный мыслительный процесс и способности представлять идею простой. В недавней беседе о влиянии тренировок на тело, Cook показал одно из самых ясных размышлений, которые я когда-либо слышал.
Мы с Грей обсуждали выводы по результатам его системы оценки Functional Movement Screen (www.functionalmovement.com). Для тех, кто не знаком с этой системой: Functional Movement Screen (FMS) это система, которая используется для оценки подвижности и стабильности тела.
Если вы тренируете не только себя, я очень рекомендую вам посетить сайт и освоить FMS. Тесты могут помочь идентифицировать потребности разных суставов тела и то, как функции суставов соотносятся с выполнением силовых упражнений.

Одна из прелестей FMS в том, что он позволяет различить проблемы стабильности и проблемы подвижности. Мысли Кука были простыми и привели меня к осознанию того, что будущее тренировок и корректирующих упражнений может быть в подходе сустав-за-суставом, а не в подходе, который основан на движениях.

Кук анализировал тело очень просто. В его понимании, тело это просто множество состыкованных суставов. У каждого сустава или группы суставов своя определенная функция и склонность к определенным, предсказуемым уровням дисфункций. В результате, у каждого сустава свои специфические тренировочные потребности. Таблица ниже рассматривает тело используя подход сустав-за-суставом снизу вверх:

Сустав – Основная тренировочная потребность
Голеностоп – Подвижность (особенно в сагиттальной плоскости)
Колено – Стабильность
Бедра – Подвижность (в разных плоскостях)
Поясница – Стабильность
Грудной отдел позвоночника – Подвижность
Плечевой – Стабильность

Первая вещь на которую вы должны были обратить внимание, когда читали таблицу это то, что суставы просто чередуются по потребности между подвижностью и стабильностью по мере движения вверх по цепочке. Голеностоп нуждается в увеличении подвижности, а колено – в увеличении стабильности.
По мере движения вверх по телу, становится очевидным, что бедрам нужна подвижность. И так продолжается вверх по цепочке: просто чередующаяся последовательность суставов.

Вероятно вы спрашиваете себя: “Какое отношение это имеет к лифтингу?” Позволит ли мне это приседать больше? Да, безусловно.
За последние двадцать лет среднестатистический посетитель тренажерного зала перешел от бодибилдерского подхода тренировок по частям тела к потенциально более интеллектуальному подходу к тренировкам по шаблонам движений.
На самом деле, в спортивном мире, фразой “движения, а не мышцы” уже практически стали злоупотреблять и, откровенно говоря, это прогресс. Я думаю, что большинство хороших лифтеров разочаровались в старом подходе грудь-плечи-трицепс, описанном в билдерских журналах и пошли вперед к принципу жим-тяга-передняя-задняя мышечные цепи.
Я думаю, что травмы, которые мы наблюдаем и технические проблемы, с которыми мы сталкиваемся со многими лифтерами тесно связаны с правильной работой суставов, или, если более точно, с дисфункциями суставов. Запутались? Давайте я попробую объяснить. Проще говоря, проблемы в одном суставе обычно проявляют себя как боль или проблема в суставе находящемся над или под ним.
Проще всего это продемонстрировать на примере приседаний. Как бывший пауэрлифтер, я знаю, что большая проблема в приседаниях это глубина. Если у вас проблемы с тем чтобы глубоко присесть, первая вещь, которую делал гуру старой школы это рекомендовал вам подложить что-то под пятки.

Возможно, мы не понимаем различия между подвижностью и стабильностью применимо к голеностопу, но мы знаем, что приседания в ботинках для рабочих позволяют проще присесть более глубоко. Проще говоря, обувь с каблуком (ботинки для рабочих, в данном случае) компенсируют слабую подвижность голеностопа. Так что, урок, который надо вынести из этого примера: работайте над подвижностью голеностопа, если у вас проблемы с глубиной приседаний.
Скольких людей вы знаете, которые не могут больше приседать из-за болей в спине. Моя теория по поводу причины? Потеря подвижности в бедрах.
Потеря функциональности в нижележащем суставе (в случае с поясницей, бедрах) похоже влияет на сустав или суставы, которые находятся выше (поясница). Другими словами, если бедра не могут двигаться, поясница будет вынуждена это компенсировать.
Проблема в том, что бедра предназначены для того чтобы быть подвижными, а поясница должна быть стабильной. Когда сустав, который должен быть подвижным, становится неподвижным, стабильный сустав (поясница) вынужден двигаться для компенсации, становясь при этом менее стабильным и впоследствии болезненным. Другими словами, если вам не хватает подвижности в бедрах или голеностопе, вы будете наклоняться вперед в приседании и переместите нагрузку на спину.
Процесс очень простой:
– Потеря подвижности голеностопа, приводит к боли в колене.
– Потеря подвижности в бедрах, приводит к боли в пояснице.
– Потеря подвижности в грудном отделе, приводит к боли в шее и плечах (или пояснице).

Голеностоп (Подвижность)
Рассматривать тело по системе сустав-за-суставом, начиная с голеностопа, похоже имеет смысл. В тех видах спорта, где много прыжков, неподвижный голеностоп приводит к тому, что стресс от приземления передается на сустав выше: колено.
На самом деле, я думаю есть прямая связь между жесткостью баскетбольной обуви и количеством тейпирования и накладок бандажа, которые коррелируют с высоким количеством случаев пателлофеморального синдрома у баскетболистов и других часто прыгающих.
Наше желание защитить потенциально нестабильный голеностоп дается высокой ценой. Мы обнаружили, что у многих наших атлетов с болями в колене есть соответствующие проблемы с подвижностью голеностопа. Зачастую это происходит после растяжения голеностопа и последующих тейпирования и накладок бандажа.
В лифтинге, как мы говорили раньше, плохая подвижность голеностопа приводит к необходимости наклоняться вперед в приседе и попытке использовать разгибатели бедра в большей степени. Вы можете определить, что у вас есть проблемы с подвижностью голеностопа пройдя тест FMS приседания со штангой над головой.

Выполните приседания со штангой над головой. Если руки наклоняются вперед (технически, руки могут наклоняться вперед, но должны оставаться на одной линии с торсом), подложите что-нибудь под пятки.
Если подъем пяток решит проблему, значит проблема в основном в голеностопе. Как определить в чем именно проблема в гибкости или в подвижности? Выполните простой тест. Займите позицию для растяжки икр. Вы чувствуете как тянутся мышцы или вы чувствуете, что “застряли” впереди?

Если вы чувствуете сильную растяжку, то это скорее проблема в гибкости и растяжка икр поможет её решить. Если вы чувствуете, что не можете продвинуться вперед, то у вас проблемы с подвижностью. Проблемы с гибкостью исправляются растяжкой, проблемы подвижности исправляются или устраняются увеличивая подвижность сустава. Если вам кажется, что между этим нет разницы, вам необходимо ещё немного изучить вопрос.

Колено (Стабильность)
Само по себе колено достаточно просто и понятно устроено. Коленям необходима стабильность. Они сгибаются с минимальным вращательным компонентом. Подумайте о приседаниях и тягах на прямых ногах. Старая школа. Можно называть это работой над задней поверхностью тела или передней, но так или иначе это не сложно.

Ключевая проблема в тренировке колена это то, что спина становится уязвимой из-за недостатка подвижности в бедрах. И вот тут начинается интересное. Приседания и тяги могут быть прекрасными упражнениями, но если вы нагружаете спортсмена у которого плохая подвижность голеностопа или бедер, вы рискуете нанести ущерб его пояснице.
Мы возвращаемся к той же идее. Большинство случаев болей в спине являются следствием не проблем со спиной, а результатом слабой подвижности в бедрах или голеностопе. Спина, в той или иной степени, жертва. Моя философия исцеления больной спины, словами специалиста по спине Стюарта МакГилла (Stuart McGill): “берегите позвоночник”.
МакГилл в обоих своих книгах подчеркивает, что у большинства тех, кто страдает от болей в спине, спина не слабая. Фактически, исследование МакГилла очень прозрачно. У тех у кого проблемы со спиной, как правило, разгибатели спины сильнее, чем у тех у кого спина слабая.
Да, это то о чем я говорю и, что важнее, что МакГилл говорит во всех своих публикациях и лекциях. Боли в спине это не слабая спина. Боли в спине возникают из-за чрезмерного использования, в основном от сгибания. И знаете что. Тяжелые приседания и тяги генерируют сгибающие силы. Посмотрите на исследования на моем сайте в категории исследования МакБрайд (McBride).

Бедра (Подвижность)
Похоже, что исключение из нашего правила подвижность/стабильность это бедра. Мой друг Джейсон Феруджиа (Jason Ferrugia) (www.j1strength.com) недавно разглагольствовал о подвижности бедер. Джейсон думает, что вся работа по увеличению подвижности бедер это пустая трата времени.
Я написал ему и не согласился с этим. На самом деле, я думаю, что в развитии силы подвижность в бедрах это главный момент. Как я написал выше, хорошо развитая подвижность бедер позволяет нам использовать упражнения, которые задействуют несколько суставов для увеличения силы нижней части тела.

Джейсон пишет, что подвижность и гибкость это синонимы. На самом деле, это не так. Гибкость применима к мышцам и является показателем длины. Подвижность применима к суставам и используется для описания движения.
Если быть честным до конца, бедра невероятно сложно устроены и заслуживают пристального внимания. Я написал статью о сгибании бедра Understanding Hip Flexion и я работаю над статьей о приведении бедра.
Бедра, как и их двойник в верхней части тела, плечи, могут быть одновременно и недостаточно подвижны и недостаточно стабильны; недостаточно подвижны из-за недостатка гибкости и недостатка движения, и недостаточно стабильны из-за слабости, слишком большого упора на упражнения выполняемые на двух ногах, или слишком большого упора на упражнениях, которые выполняются на тренажерах.

Результатом может быть боль в колене из-за недостаточной стабильности (слабые бедра будут допускать внутреннее вращение и приведение бедра) или боль в спине из-за недостаточной подвижности и сопутствующего наклона вперед. Как сустав может быть одновременно и недостаточно стабильным и недостаточно подвижным – это интересный вопрос.
Слабость и/или недостаточная подвижность бедер в сгибании или разгибании приводит к соответствующим компенсирующим движениям в пояснице. И в приседаниях это проблема. В нашей концепции сустав выше/сустав ниже, недостаток движения в бедрах подвергает риску поясницу в приседаниях.
Когда позвоночник двигается для того чтобы компенсировать недостаток силы и подвижности в бедрах, бедра ещё больше теряют подвижность. Похоже, что недостаток силы в бедрах приводит к недостатку подвижности, а недостаток подвижности, в с свою очередь, приводит к компенсирующим движениям в позвоночнике. В итоге мы получаем головоломку: сустав, которому необходима сила и подвижность в нескольких плоскостях.
Рассмотрим взаимосвязь далее. Слабость бедер в предотвращении приведения приводит к дополнительной нагрузке на колено. Мы упрощаем это до слабости средней ягодичной мышцы, однако слабость часто касается и большой ягодичной и вращателей бедра.
В таком случае, нам необходим контроль в фронтальной плоскости, чтобы предотвратить проблемы пателлофеморальной области, проблемы с подвздошно-большеберцовым трактом, и др. В сагиттальной плоскости, недостаточная сила и/или активация поясничной или подвздошной мышц приведет к тому, что сгибание поясницы будет использоваться как замена сгибания бедер.
Недостаточная сила и/или активация ягодиц приведет к компенсирующему шаблону разгибания поясницы, который будет пытаться заменить разгибание бедер. Другими словами, если вы не можете поднять колено вверх (согнуть бедро), вы согнете поясницу, для того чтобы добиться похожего движения.

Поясница (Стабильность)
С поясницей всё ещё интереснее. Поясница однозначно представляет из себя последовательность суставов, которым необходима стабильность, как свидетельствуют все работы последних лет в области стабильности кора.

Как это ни странно, самая большая ошибка, которую, я считаю, мы сделали в тренировках за последние десять лет, это участие в активных попытках увеличить статический и активный диапазон движений области, которой необходима стабильность.
Другими словами, ребята, вам не нужно растягивать поясницу. Поверьте, я знаю, что вы хотите сказать. “Я испытываю приятные ощущения от вращений”. Я испытываю приятные ощущения, когда выполняю эти растяжки. Почитайте статью Is Rotation Even a Good Idea? на моем сайте.
Знаете, что я говорю тренерам, когда они мне говорят “я испытываю приятные ощущения, когда делаю Х”? Я говорю им, что чесать корочку на порезе тоже приятно. Но в результате пойдет кровь и образуется шрам.
Так я отношусь к растяжкам с вращением в пояснице. Это как расчесывать корочки на ранах. Я думаю, что многие, если не все, вращательные упражнения, которые выполняются для поясницы, имели неверную цель. Sahrmann (Diagnosis and Treatment of Movement Impairment Syndromes) и Porterfield и DeRosa (Mechanical Low Back Pain: Perspectives in Functional Anatomy) указывают на то, что попытки увеличить диапазон движений в пояснице, не рекомендуется и потенциально опасны.
Я считаю, что недостаток понимания подвижности грудного отдела позвоночника заставляет нас добиваться бОльшего вращательного диапазона движений в пояснице, а это огромная ошибка. Давайте вернемся к лифтингу.

Вывод тут такой: никогда, и я действительно имею в виду никогда, не используйте никакие тренажеры с вращением торса. Исключите все повороты туловища, скорпионы и др., которые вы делаете, чтобы “разогреть” поясницу. Как говорит МакГилл, “берегите позвоночник”.
За последние десять лет все разговоры были о стабильности кора, а не о подвижности. Поясница должна быть стабильной, а не подвижной. Приседайте с ровной спиной, держа гриф высоко; делайте становые тяги с плоской спиной. Если у вас уже болела поясница, делайте одноногие упражнения.

Грудной отдел позвоночника (Подвижность)
Грудной отдел позвоночника это область о которой мы, кажется, знаем меньше всего. Многие физиотерапевты рекомендуют увеличивать подвижность грудного отдела, хотя только у некоторых есть упражнения, которые разработаны для увеличения подвижности грудного отдела позвоночника.
Подход, похоже, такой “мы знает, что вам это нужно, но не знаем точно как этого добиться”. Я думаю, что в течение нескольких последующих лет мы увидим увеличение количества упражнений, которые созданы для увеличения подвижности грудного отдела позвоночника. Любопытно, что в книге “Диагностика и лечение синдрома двигательных нарушений“ (Diagnosis and Treatment of Movement Impairment Syndromes), физиотерапевт Shirley Sahrmann выступает за развитие подвижности грудного отдела позвоночника и ограничение подвижности поясницы.
Мы добавили простые упражнения для развития подвижности грудного отдела к нашей разминке для того чтобы попытаться восстановить потерянную подвижность позвонков грудного отдела.

С точки зрения лифтера, подвижность грудного отдела может казаться не важной, но если вы страдаете от болей в пояснице или в шейном отделе, то работа над подвижностью грудного отдела убережет обе эти области.

Лопаточно-грудное сочленение/сустав (Стабильность)
По мере того как мы поднимаемся далее по кинетической цепи, мы доходим до лопаточно-грудного сочленения, которое является пересадочной станцией к верхней части тела. Это место присоединения лопатки и туловища и также ключ к здоровым плечам.
Логика подсказывает, что это сустав, которому необходима стабильность. А для лифтера, это ключ к здоровью вращающей манжеты плеча. Как все мы знаем, наша очарованность жимом лежа сделала тендинит вращающей манжеты плеча практически почетным знаком мира лифтинга.
Charles Poliquin часто говорил о силе нижней части трапеции и её влиянии на здоровье плеча. Подытожим. Лопаточно-грудной сустав обычно слаб и недостаточно развит. Большинство силовых атлетов не работают даже приблизительно достаточно над спиной и редко работают над серединой спины, с помощью таких упражнений как тяги.
Если они делают тяги, то им нравятся как правило тяги в наклоне, что зачастую подвергает риску поясницу, в попытке поработать над стабилизаторами лопатки. Большинству, если не всем лифтерам, необходимо выполнять, как больше тяг для лопаточно-грудного сустава, так и изолирующие упражнения для лопаточно-грудного сустава.
Подъемы для нижних трапеций, как и упражнения, которые стали известны как Y, T, W, L или U все непосредственно воздействуют на стабилизаторы лопатки.

Выполните небольшой тест. Попробуйте сделать максимальное количество обратных подтягиваний.
Вы можете сделать 10? Большинство “сильных” парней не могут выполнить 10 повторов с касанием перекладины грудью без читинга. И как только они проваливаются, они немедленно начинают придумывать оправдания. Оправдание номер один это то, что их невероятный размер не позволяет им коснуться грудью перекладины.
Тогда мой следующий вопрос. Почему ваш невероятный размер позволяет вам выполнять жим? Обычно в этом месте они замолкают и признают свою слабость. Работайте над стабильностью лопатки и в то же время, развивайте силу ромбовидных мышц и нижних трапеций. То что вы не видите эти мышцы в зеркале, не значит, что они не важны.

Плечо
Плечевой сустав похож на бедра. Плечевой сустав создан чтобы быть подвижным, однако часто становится неподвижным.
Плечо это сложная система в которой плечевой сустав тесно связан с лопаточно-грудным суставом. Мне нравится тут такая аналогия: «Вы не можете стрелять из пушки находясь в каноэ».
Лопаточно-грудной сустав это стабильная основа, которая позволяет подвижному плечу работать. Мы должны быть способны запирать плечи на месте отведенными назад и сжатыми с лопатками для того чтобы плечевой сустав работал правильно.
Основная мысль в том, что стабильный плечевой комплекс приведет к здоровому плечевому комплексу. Самое лучшее упражнение, которое демонстрирует эту взаимосвязь это скольжение по стене (Wall Slides). Это упражнение наилучшим образом может быть описано как упражнение с активным диапазоном движений для плечевого сустава, комбинированное с упражнением на стабильность лопаточно-грудного сустава.

Ключ к выполнению скольжения по стене это то, что лопатки должны оставаться сведенными и отведенными назад, в то время как плечевой сустав должен пытаться поднять руки над головой. Изображая, что вы выполняете жим над головой.
Многие начинающие будут на самом деле сжимать область ромбовидных мышц и нижних трапеций, когда они будут пытаться выполнить это упражнение. Основной момент тут в том, что предплечья должны скользить вверх прикасаясь к стене, в то время как лопатки должны оставаться отведенными вниз и назад.
Не удивляйтесь если у вас не получится выполнить это упражнение. Это займет какое-то время. Поднимайте руки над головой настолько насколько позволяет ваш диапазон движений без появления боли. Первоначально это может быть небольшой диапазон движений, но поверьте мне, он будет увеличиваться.

С точки зрения лифтера, важный вывод заключается в том, что здоровье плеча зависит от того, что мы не видим в зеркале. Я думаю, что большинство лифтеров должны воздержаться от тяжелой работы в упражнениях с поднятием отягощения над головой, до тех пор, пока они не освоят качественное выполнение скольжения по стене.
Я также думаю, что необходимость в комбинации стабильности и подвижности в плечевом суставе, является хорошей предпосылкой для использования упражнений, таких как отжимания на фитболе или мяче BOSU, а также однорукие упражнения с гантелями.
Неспособность суставов работать нормально, подвергает стрессу суставы выше или ниже. В книге Ultra Prevention (это также и хорошая книга по питанию), авторы прекрасно описывают наш текущий метод реагирования на травмы. Их аналогия очень проста: наша реакция на травму похожа на то, что мы слышим как сработал детектор дыма, подходим к нему и вытягиваем из него батарею.
Боль, как и звук, это предупреждение о каких-то других проблемах. Прикладывать лед к воспаленному колену, не обследовав голеностоп или бедра, это как вытянуть батарею из детектора дыма.
Нам нужно осознать, что “Мы стареем слишком рано и умнеем слишком поздно”. Оскар Уайльд говорил: “Я недостаточно молод, чтобы всё знать”.
Каждый день я узнаю больше и больше о теле. То, что я узнаю, позволяет мне быть более хорошим тренером и более хорошим учителем. Зачастую, то что я выучил, противоречит тому, во что я верил ранее. Просто помните, что когда-то считалось, что мир плоский.
Майкл Бойль международно признанный тренер, педагог и консультант. Кроме того, Майкл создатель широко известной серии DVD Functional Strength Coach. Для того чтобы узнать больше или прочитать больше www.michaelboyle.biz.




kalashnikovdm 
Feb. 26th, 2013 09:24 pm (UTC)
Добрый вечер. По просьбе Натальи делаю короткую рецензию на статью.

Статья оставила противоречивые ощущения. Непонятна целевая аудитория. Для специалистов – несерьезно, видно, что у автора большие пробелы в базовых знаниях по анатомии и кинезиологии, есть грубые ошибки, обусловленные этими пробелами, утверждения декларативны, без единой ссылки на научные данные.

Для любителей – тоже не очень… В принципе простые, очевидные утверждения выражены в форме, сочетающей странные наукообразности, перемежающиеся залихватскими лозунгами.
Анализировать все ошибки не буду, неблагодарное занятие. Любителю фитнеса глубины анатомии ни к чему.

Единственно, на что укажу, что в одних случаях сложное явление автор необоснованно упростил, в других – простое, очевидное, облёк в какие-то сложные, наукообразные рассуждения.

Вот пример упрощения: «…Скольких людей вы знаете, которые не могут больше приседать из-за болей в спине. Моя теория по поводу причины? Потеря подвижности в бедрах…» Даже комментировать бессмысленно. Причин, на самом деле много, и разбираться с ними нужно очень дотошно.

И таких примеров в тексте масса.
Попробую, так сказать, «подправить» контент.

Противопоставлять «подвижность» и «стабильность» не нужно. А уж тем более утверждать, что в отношении одного сустава важно одно, а в отношении другого – другое.

Подвижность сустава характеризует возможный диапазон активных или пассивных движений в нем.

Стабильность, в контексте темы - способность сохранять безопасное, стабильное состояние сустава при выполнении какого-либо движения или при преодолении нагрузки. Зависит от состояния сустава (гипермобильность уменьшает стабильность), развитости мышц этого сустава, координационных способностей этих мышц.
kalashnikovdm 
Feb. 26th, 2013 09:26 pm (UTC)
Очевидно, что:

• и подвижность, и стабильность КАЖДОГО сустава напрямую влияют на риск травмирования
• весь опорно-двигательный аппарат – единая кинематическая цепь, где каждый из ее элементов подвергается внутренним силам, в том числе, со стороны соседнего элемента. Это активные силы (силы сокращающихся мышц) и пассивные силы (силы упругости мышечных волокон, силы, передающиеся связками, сухожилиями и т.п.). Поэтому ненормальные усилия или ненормальное положение в одной части этой цепи будет передано на все остальные части.
• КАЖДЫЙ из суставов обязан обладать ДОЛЖНОЙ и подвижностью, и стабильностью.

Эти качества действительно проверяются разными тестами или оцениваются по способности технически верно выполнять разные движения.

(Кстати, второй тезис про кинематическую цепь удобно проиллюстрировать вот таким примером. Женщина учится ходить на высоких каблуках. Стопа сгибается (встает на носки) – тянет за собой голень. Голень, а значит и колено, уходят вперед – нужно, для выравнивания, подать корпус назад. Сгибается колено, некрасиво. Нужно разогнуть колено – напрягается квадрицепс, в т.ч. прямая м. бедра. – тянет вперед таз. Таз наклоняется вперед – нужно сохранить равновесие – подать корпус назад. Позвоночник переразгибается в поясничном отделе - гиперлордоз).

Подвижность суставов может быть ухудшена из-за тугоподвижности окружающих их мышц (а это, в свою очередь, из-за их неиспользования, или из-за их долгого нахождения в укороченном состоянии, или из-за старения), из-за односторонней перекаченности каких-то из них.

Например, сидит человек постоянно, у него подвздошно-поясничная мышца все время укорочена. Такой укороченной и остается: встал, таз наклонился вперед.

Тесты для оценки подвижности в суставах стандартны, информация в интернете есть. Погуглите: Flexibility tests

Кроме тестов, показанных автором статьи, можете проверить остальные суставы и движения. Кто захочет углубиться – книга «Клиническая диагностика болезней суставов» - Доэрти М., Доэрти Дж.

Хорошо раскрыл эту тему Сергей Струков (ака ssf20) в «Основах фитнес тренировки» http://shop.fitness-pro.ru/index.php?route=product/product&path=59&product_id=70)

Что касается стабильности. Тема сложная. Стабильность в большой степени зависит от сбалансированного развития мышц и их координационных способностей. Тестирование сложное, солидной доказательной базы корректности такого тестирования нет. Поэтому рекомендую ориентироваться на способность спортсмена выполнять любое упражнение строго в соответствии с правильной техникой. В отношении позвоночника это требование заключается в трех условиях:

1. Держать позвоночный столб при любых ситуациях как можно ближе к его естественному анатомическому положению
2. Если речь не идет о наклонах, то держать отягощение как можно ближе
3. Исключить сочетание двух условий: движение позвоночника и осевая нагрузка (которая, кстати, появляется при наклоне вперед).
(Примечание, Без осевой нагрузки, при здоровом позвоночнике, движения нужны (подкачка жидкости в межпозвоночные диски)).

Сбалансированности можно добиться, обеспечив в микроцикле все основные движения: встал-присел, наклонился-разогнулся, повернулся в одну-в другую сторону, повис-подтянулся, толкнул от себя (руки вперед), притянул к себе (руки к себе, назад), поднял что-то над головой.

Из перечисленного, движений рук вперед и вверх (т.е. любые жимы) – поменьше, остальных – побольше. Руки вверх или от себя с отягощениями и на разЫ – в принципе движения неестественные, в жизни наших предков случались редко (а значит, ОДА к ним приспособиться не успел). Поэтому так часты травмы (при движении плеча вверх он утыкается в акромион лопатки, при движении вперед – в клювовидный отросток. Посмотрите здесь:http://www.youtube.com/watch?v=9KwWwUEsNCQ ) Жим лежа – он вообще чисто для красоты, чтоб грудь накачать. В жизни таких движений нет. Поэтому с ним поаккуратнее.

Короче, идею автора можно свести к следующему: плохая стабильность и подвижность плохо, хорошая – хорошо))) Протестируйте подвижность, ликвидируйте тугоподвижность. И опасайтесь нестабильности))))))))))))
Удачи!
kalashnikovdm 
Feb. 26th, 2013 09:38 pm (UTC)
P.S. Рекомендую по этой теме очень хорошую книгу: НАУКА О ГИБКОСТИ, автор Майкл Дж. Алтер http://rutracker.org/forum/viewtopic.php?t=3888081



The Mobility-Stability Continuum A New Look At Joint Health by Mike Robertson


Mobility and stability go together like peanut butter and jelly... spandex and cardio... Eric Cressey and Tony Gentilcore.
Over the past few years, gentlemen much smarter than myself have been discussing the importance of mobility and stability at length. Stuart McGill, Mike Boyle, Gray Cook, Bill Hartman, and Eric Cobb all come to mind.
It started off quietly, but this topic has slowly grown to the point where I felt the need to bring the pendulum back to center. Somewhere along the way, we lost sight of the big picture. This may sound weird coming from a purported "mobility" guy, but hear me out.
I want to clear up some misconceptions regarding mobility training and help you to better understand how truly inter-related mobility and stability are. Along the way, we'll find out what other influences (outside of mobility and stability) could be affecting your performance.

Two Sides of the Same Coin
Mobility and stability are complementary in nature. When you strive to improve mobility at a joint, to some degree you sacrifice stability. It works the opposite way as well; the more stable you make a joint, the more you inherently restrict its mobility.
Before we go any further, let's get the semantics out of the way. Here are the Bill Hartman-approved, "simple" definitions:
When examining mobility, the key factors involved include the architecture of the joint(s) at hand, soft-tissue length, and neural control over the surrounding muscle groups.
Stability is created via a blend of active and passive influences. Passive constraints include the joint capsule, ligaments, and the joint architecture itself, along with more active constraints like motor control of surrounding musculature, muscular strength, etc.
Each joint serves a specific purpose — to produce a given movement. Mike Boyle took the concept to another level when he introduced his "joint-by-joint" approach to training. Here's the Reader's Digest recap: It appears as though each joint requires either more mobility training or more stability training.
Even more interesting is that it appears they alternate in fashion. A joint which needs more mobility is surrounded, above and below, by a joint that needs more stability, and the opposite is true.
The chart below depicts each joint's primary need, according to the joint-by-joint approach (1):
Joint — Need
Foot — Stability
Ankle — Mobility
Knee — Stability
Hip — Mobility
Lumbar Spine — Stability
Thoracic Spine — Mobility
Scapula — Stability
Gleno-Humeral Joint — Mobility
Elbow — Stability
This view is beautiful in its simplicity. However, it has led to plenty of detractors, mostly people who hold their own dogmatic views or those who don't fully understand the concepts.
Unfortunately, some people seem to think that the joint-by-joint approach is purely black and white. If the joint-by-joint table says the hip needs more mobility, then dammit, you're going to give it more mobility!
If all you've got is a hammer, everything looks like a nail.
The hip generallyneeds more mobility. However, there are certain individuals who have excessive hip mobility and therefore require more stability. The joint-by-joint approach gives you a base understanding of the movement requirements at each joint, but it can't be applied injudiciously and without first making proper assessments. The chart doesn't replace the assessment, but it speeds things up and makes it more efficient.

It's Easy, But Not That Easy
We'll use the knee as an example. According to the joint-by-joint approach, the knee needs more stability. But in fact, a knee with restricted sagittal plane mobility (flexion and extension) would be at an increased risk of injury.
Instead of broadly saying that we need to stabilize the knee joint, we'd be better off by saying that we need to stabilize it in the frontal and transverse planes, while mobilizing it in the sagittal plane.
Perhaps a better way to state this is that the joints in the "mobility" section of the column have more freedom of movement (in multiple planes) when compared to the "stability" joints. Instead of thinking black and white, we need to think of things in a grayscale fashion.
The Mobility-Stability Continuum
The mobility-stability continuum piggybacks upon the joint-by-joint approach, and hopefully takes it to the next level. It's not necessarily "new," but I hope it'll enhance your understanding of what you already know.
Hopefully we are in agreement that all joints need some degree of mobility andsome degree of stability. The key is to understand how much mobility/stability we need at each specific joint.
Stable   Mobile
KneeElbowScapulaHipShoulder
If we examine the continuum above, on the left we have joints that traditionally need more stability. On the right, we have joints that need more mobility. If we understand the architecture of each joint, this concept becomes even clearer.
Let's look at the knee and elbow, two joints similar in architecture and function. They should require an equal amount of stability, right? Not quite.
The elbow is comprised of the humerus, the radius, and the ulna. So while you can flex and extend your elbow, the inclusion of pronation and supination via the radius tells us it needs a little bit more mobility than the knee. The knee, even though it canmove slightly into internal and external rotation, should only be trained to flex and extend.
Another example is the difference between the hips and shoulder joints. They're both similar in nature (ball and socket joints), but the femoral head sits much higher and tighter within the joint than the humeral head does.
The hip socket is also much deeper than the glenoid, which accounts for more differences in joint mobility. So while they're similar in architecture, the hip will naturally be more stable than the shoulder.
The trickiest joint, in my estimation, is the scapulo-thoracic joint. I've heard both sides of the equation argued. Some will say it needs more mobility, while others will say it needs more stability. I'm not sure that we need equal training of both, but let's just say we need to understand the multiple functions surrounding the scapulae and train accordingly.
If you don't have adequate stability, it's only a matter of time until you suffer from some sort of rotator cuff injury. Recent literature states that in patients with gleno-humeral instability, their scapula is unstable 100% of the time!(1)
I don't know about you, but I think 100% is pretty damn often. With regard to training, we generally need more stability with regards to scapular protraction, retraction, and depression.
On the other hand, if you don't have adequate mobility in the scapulae (especially into upward rotation), you're again at risk for impingement injuries. In her book, Diagnosis and Treatment of Movement Impairment Syndromes, Shirley Sahrmann ranks scapular downward rotation syndrome as the most prevalent upper extremity issue.(2)
What does this mean to you? Absolutely nothing... if you are cool with never putting your hands over your head for the rest of your life. Bill Hartman and I wrote an entire article about this.
After all, we can get 120 degrees of shoulder abduction or flexion from our gleno-humeral joint, but if we aren't getting that necessary 60 degrees of upward rotation from the scapulae, it's going to lead to issues down the line.
This would severely impact our "raise the roof" skills.
The take home message here is this: Stop thinking about things in black and white, mobile and stable. Instead, think about how mobility and stability work in unison. You can't have one without the other. The key is understanding the architecture of the joints themselves, the soft-tissues surrounding them, and how they're used in motion throughout the day.

Mobility Training vs. Loaded Mobility
Another interesting concept is unloaded or bodyweight mobility training vs. loaded mobility training. Both have their role, but we need to examine them in a situation-specific context.
I've heard a lot of people try to refute Dr. Stuart McGill's claim that the lower back needs more stability. I don't know about you, but when Dr. McGill speaks, I listen. After hearing him speak in Chicago this past year, I'm even more impressed with his understanding of the human body, especially the lower back.
One of McGill's examples discusses how the core is designed to prevent rotation and counteract movement around the lumbar spine. If you look at the anatomy involved, the core (including the rectus abdominus, internal and external obliques, and transverse abdominus) is layered in a cross-hatched fashion that predisposes it to being stable and preventing rotation.
Along these same lines if your rectus abdominus were truly designed to promote spinal flexion, you'd have two long hamstrings instead of your beloved six or eight-pack!(3) Sahrmann agrees with this point as well.
People in the "more mobility" movement have argued that McGill must be crazy and that movement is inherent around any joint. I agree to some extent, but remember that while some movement is necessary, it's all relative! Just because we can get more mobility from certain joints doesn't mean we should.
Bogduk also states there's only about 1-2 degrees of rotation around each lumbar segment, with the exception of L5-S1.(4) In contrast, the upper segments of the thoracic spine have 8-9 degrees of rotation per segment. Where would you rather get your mobility from?
Another example would be the strength trainee with knee pain. For these people, unloaded or bodyweight mobility drills could be very beneficial and pain-free. However, give this same person some dumbbells and have them perform a movement pattern like a lunge, and you could very easily increase pain and irritation while losing training time.
In the end, I can't give you a definite answer like< "You need X amount of movement at each joint." That's just not possible. Instead, remember that our simple definition of mobility is the ability to produce a desired movement.
The gleno-humeral joint mobility needs are vastly different between a high-level pitcher and your average strength trainee. As well, understand that it's not necessarily about more total mobility as it is about optimizing mobility for your given sport.
The key is that strength training should be good for your body. You should be able to move through a full range of motion (ROM) pain-free. If you can't, you need to figure out why, and address it.
Dr. Cobb put this into words for me a while back. "Strength training cements your posture and mobility." Whether that posture is good or bad is up to you. The question is, are you cementing good, clean movement patterns through a full ROM? Or are you cementing inefficient, pain-producing movements through a limited ROM?
Finally, keep in mind that there's a definite difference between unloaded, bodyweight mobility drills and loading that mobility via strength training.

The Problem With Stiffness
Unfortunately, understanding mobility and stability is only part of the equation. The concept of stiffness is one we've only recently begun to understand in depth.
Here's an example of how mobility, stability, and stiffness work together:
I've posted this clip several times now, because it helps me present several key points. Three months before I shot this video, he couldn't squat, lunge, or deadlift without lower back pain. In all honesty, he couldn't even approach parallel on a bodyweight squat without back pain!
In the clip above, his mobility is vastly improved, yet there's still something missing. Many would say that he's still too tight in his hips, and that's true to some degree. But the bigger issue here is the imbalance in stiffness we're seeing between his hips and lower back. Sahrmann discusses stiffness throughout her text, but here's another quick and dirty definition:
Boyle related stiffness to two bands pulling on each other. One band is big and strong (representing our hip stiffness), while the other band is smaller and weaker (representing our lower back stiffness).
Since the bands aren't equal, the bigger band (greater stiffness) is going to force the smaller band to deform more than it normally would. If the bands were of equal strength, pulling on one would create an identical change in the other.
In the example above, Justin's hips are stiffer than his lumbar spine. As he moves into deeper hip flexion, his hip stiffness exceeds that of his lumbar spine, so his low back rounds.
Now we could stretch his hips until the cows go home and get some results, but the better option is to increase the stiffness in his lower back and reduce his ROM to something more appropriate (where he can maintain a natural lordotic curve in his back). We've since changed this in his programming and his squat is coming around nicely.

Using Stiffness For Better Performance
Now I'm sure some of you are thinking something along the lines of, "No! Stiffness sucks! I don't want any of that damn stiffness hibbity-jibbity stuff going on." More than anything, I think it comes from a misunderstanding of the term "stiffness."
People hear the term and they assume that it means being immobile, inflexible, or something along those lines. However, stiffness doesn't have to be bad. If you watch any high-level athlete move, they know how to utilize stiffness to produce more powerful movement.
Way back when, this athlete (so to speak) also used stiffness to produce powerful movements.
In the hips of an elite powerlifter; the stiffness generates starting and reactive strength for big squats and pulls. The posterior of an athlete with a big vertical jump uses stiffness in the gastroc, soleus, and Achilles to produce serious hang-time. It's not so much the stiffness that causes the issue, but the imbalance in stiffness.
In our recent article on Olympic vs. Powerlifting Squats, Geoff Neupert and I discussed the benefits of going deep while squatting. Olympic lifters are usually a great example of balanced stiffness.
You'll see these lifters go ass-to-calves deep in a squat, with no true rounding of the lower back. How? They've balanced the stiffness between their hips and lumbar spine to be able to do so.
The concept of stiffness goes beyond a single article, but this is a good starting point to make you aware of its presence and how it may be influencing your exercise performance.
Bill Hartman and I are currently working on a project that will outline our progressions to not only get you squatting deeper, but to do so with an appropriate lower back posture to boot. Stay tuned for that.

Summary
Understanding human movement isn't the easiest thing in the world. Just when you start to understand the basic concepts like mobility and stability, new influences like stiffness pop up to muddy the waters and cloud our perceptions as to what is "true."
So where does this leave us? The obvious goal in training now becomes not just balancing mobility and stability, but also balancing stiffness between adjacent structures to produce smooth and efficient movement. When we do that, we have the best chance to perform at an extremely high level while minimizing the risk of injury.

About the Author

References
1: Kibler, WB. (1998) The Role of the Scapula in Athletic Shoulder Function. Am J Sports Med, 26, 325-337.
2: Sahrmann, S. (2002) Diagnosis and Treatment of Movement Impairment Syndromes. St. Louis: Mosby, Inc.
3: McGill, S. (2007). Designing Exercise for the Painful Low Back. Chicago: Perform Better Functional Training Summit.
4: Bogduk, N. (2005). Clinical Anatomy of the Lumbar Spine and Sacrumi. Atlanta: Elsevier Health Sciences.

A Joint-by-Joint Approach to Training by Michael Boyle


My good friend, Physical Therapist Gray Cook, has a gift for simplifying complex topics. I envy his ability to succinctly take a complicated thought process and make the idea appear simple. In a recent conversation about the effect of training on the body, Cook displayed one of the most lucid thought processes I'vc ever heard.
Gray and I were discussing the findings from his Functional Movement Screen evaluation system. (www.functionalmovement.com). For those who are unfamiliar, the Functional Movement Screen is a system used to evaluate the mobility and stability of the body.
If you train athletes other than yourself, I'd strongly recommend you visit the site and familiarize yourself with the screen. The tests can help to identify the needs of the different joints of the body and how the function of the joints relates to the execution of the lifts.
One of the beauties of the Functional Movement Screen is that the screen allows us to distinguish between issues of stability and issues of mobility. Cook's thoughts were simple and led me to realize that the future of training and of corrective exercise may be on a joint-by-joint approach rather than a movement-based approach.
Cook's analysis of the body was a straightforward one. In his mind, the body is just a stack of joints. Each joint or series of joints has a specific function and is prone to specific, predictable levels of dysfunction. As a result, each joint has specific training needs. The table below looks at the body on a joint-by-joint basis from the bottom up:
The first thing you should notice as you read the above table is the joints simply alternate between the need for mobility and stability as we move up the chain. The ankle needs increased mobility, and the knee needs increased stability.
As we move up the body, it becomes apparent that the hip needs mobility. And so the process goes up the chain: a simple, alternating series of joints.
You're probably asking yourself, "What does this have to do with lifting?" Can it make me squat more? Yes, absolutely.
The basic fact is that over the past twenty years the average gym-goer has progressed from the bodybuilding approach of training by body part to a potentially more intelligent approach of training by movement pattern.
In fact, in the sports world, the phrase "movements not muscles," has almost become an overused one and, frankly, that's progress. I think most good lifters have given up on the old chest-shoulder-triceps muscle mag thought process and moved forward to a push-pull-anterior chain- posterior chain thought process.
I think the injuries we see and technical problems we encounter with many lifters relate closely to proper joint function or more appropriately to joint dysfunction. Confused? Let me try to explain. In simplest terms, problems at one joint usually show themselves as pain or a problem in the joint above or below.
The simplest illustration is in the squat. As a former Powerlifter, we know that the big issue in the squat is depth. If you had trouble getting deep, the first thing the old school gurus did was recommend that you elevate the heels.
We may not have understood the difference between mobility and stability as it related to the ankle, but we did know that squatting in work boots allowed us to get depth easier. In simple terms, heeled shoes (work boots in this case) compensate for poor ankle mobility. So the take home lesson is work on ankle mobility if you have depth issues in the squat.
How many people do you know who can no longer squat due to back pain. My theory of the cause? Loss of hip mobility.
Loss of function in the joint below (in the case of the low back, the hip) seems to affect the joint or joints above (lumbar spine). In other words, if the hip can't move, the lumbar spine will.
The problem is that the hip is built for mobility, and the lumbar spine is built for stability. When the supposedly mobile joint (in this case the hip) becomes immobile, the stable joint ( the lumbar spine or lumboscaral joint) is forced to move as compensation, becoming less stable and subsequently painful. In other words, if you lack hip mobility or ankle mobility, you'll lean forward in the squat and shift stress to the back.
The process is simple:

The Ankle (Mobility)
Looking at the body on a joint-by-joint basis beginning with the ankle, this thought process seems to make sense. In jumping sports an immobile ankle causes the stress of landing to be transferred to the joint above: the knee.
In fact, I think there's a direct correlation between the stiffness of the basketball shoe and the amount of taping and bracing that correlates with the high incidence of patella-femoral syndromes in basketball players and other frequent jumpers. (ADD Anterior Knee Pain Link)
Our desire to protect the potentially unstable ankle comes with a high cost. We've found many of our athletes with knee pain have corresponding ankle mobility issues. Many times this follows an ankle sprain and subsequent bracing and taping.
In lifting, as we noted above, poor ankle mobility results in a need to lean into the squat and attempt to use the hip extensors to a greater degree. You can tell if you have an ankle mobility issue by taking the FMS Overhead Squat Test.
Perform an overhead squat. If the arms fall forward (technically, the arms can fall forward but must stay in line with the trunk angle), then add a heel lift.
If the heel lift solves the problem, the problem is primarily in the ankle. How do you know it's a mobility issue versus a flexibility issue? Take a simple test. Assume a calf stretch position. Do you feel a huge stretch or a do you feel "stuck" in front?
If you feel a big stretch, you have a flexibility issue and calf stretching will help. If you feel "stuck" or a pinch, you have a mobility issue. Flexibility issues are cured by stretching, mobility issues are cured or cleared by mobilizing the joint. If you think there's no difference, you need a little more studying

The Knee (Stability)
The knee itself is simple and straight-forward. Knees need stability. They are hinges with minimal rotary components. Think squats and straight leg deadlifts. Old school. Call it anterior chain and posterior chain if you want, but it's not complicated.
The key problem in training the knee is that the back gets compromised due to lack of hip mobility. Here's where it gets interesting. Squats and deadlifts may be great exercises, but if you load an athlete who has poor ankle or hip mobility, you risk damage to the low back.
We come back to the same idea. Most back pain is not a result of a bad back, but rather the result of poor hip or ankle mobility. The back is more or less the victim. My philosophy to cure a bad back is to, in the words of back expert Stuart McGill, "spare the spine."
McGill, in both his books (www.michaelboyle.biz/joomla/content/view/72/53/ ), emphasizes that most back pain sufferers don't have a weak back. In fact McGill's research is very clear. Those with a bad back generally have stronger back extensors than those with a weak back.
Yes, that's what I said and more importantly, what McGill states in all his writings and lectures. Back pain is not about a weak back. Back pain is about overuse, primarily from flexion forces. Guess what. Heavy squats and deadlifts produce flexion forces. Look at the research on my website under McBride research.

The Hip (Mobility)
The exception to our mobility/ stability rule seems to be at the hip. My friend Jason Ferrugia (www.j1strength.com ) has been ranting about hip mobility lately. Jason thinks all hip mobility work is a waste of time.
I wrote to him and disagreed. In fact, I think in strength development hip mobility is key. As I stated above, good hip mobility allows us to use multi-joint exercises to strengthen the lower body.
Jason writes that mobility and flexibility were synonyms. In reality, they aren't. Flexibility applies to muscles and is indicative of length. Mobility applies to joints and is used to describe motion.
To be honest, the hip is incredibly complicated and merits great attention. I wrote an entire article on Understanding Hip Flexion (www.michaelboyle.biz/joomla/content/view/21/34/) and am working on one on Understanding Adduction.
The hip, much like its upper body counterpart, the shoulder, can be simultaneously immobile and unstable; immobile because of lack of flexibility and lack of motion, and unstable due to weakness, too much reliance on double leg strength exercises, or too much reliance on machine based training.
The result can be knee pain from the instability (a weak hip will allow internal rotation and adduction of the femur) or back pain from the immobility and accompanying forward lean. How a joint can be both immobile and unstable is the interesting question.
Both weakness and/ or immobility of the hip in either flexion or extension causes a corresponding compensatory action at the lumbar spine. This is the problem in squatting. In our joint above/ joint below concept, the lack of hip motion compromises the low back in squatting.
As the spine moves to compensate for the lack of strength and mobility of the hip, the hip loses more mobility. It appears that lack of strength at the hip leads to immobility, and immobility in turn leads to compensatory motion at the spine. The end result is a kind of conundrum: a joint that needs both strength and mobility in multiple planes.
Let's look further at the interrelationships. The weakness of the hip in preventing adduction causes stress at the knee. We've oversimplified this to a glute medius weakness, however the weakness often extends to the glute max and the hip rotator group.
In this case we need frontal plane control to prevent patella femoral problems, IT band issues, etc. In the sagittal plane, poor psoas and iliacus strength and/or activation will cause a pattern of lumbar flexion as a substitute for hip flexion.
Poor strength and/or activation of the glutes will cause a compensatory extension pattern of the lumbar spine that attempts to replace the motion of hip extension. In other words, if you can't move your knee up (i.e flex the hip), you'll flex the lumbar spine to achieve a motion that appears similar.

The Lumbar Spine (Stability)
The lumbar spine is even more interesting. The low back is clearly a series of joints in need of stability, as evidenced by all the work in recent years in the area of core stability.
Strangely enough, the biggest mistake I believe we've made in training over the last ten years is engaging in an active attempt to increase the static and active ROM of an area that obviously craves stability.
In other words folks, you don't need to stretch your low back. Trust me, I know what you're going to say. "It feels good to rotate." It does feel good when I do that stretch. Check out my article, Is Rotation Even a Good Idea? (link to Is Rotation Even A Good Idea?) on my site.
Do you know what I tell coaches and trainers when they tell me "it feels good when I do X," I tell them scratching a scab on a cut also feels good. However, the result is bleeding and scar formation.
This is how I feel about rotational stretches for the low back. They're like scratching a scab. I believe that most if not all of the many rotary exercises done for the lumbar spine were misdirected. Both Sahrmann (Diagnosis and Treatment of Movement Impairment Syndromes) and Porterfield and DeRosa (Mechanical Low Back Pain: Perspectives in Functional Anatomy) indicate that attempting to increase lumbar spine ROM isn't recommended and potentially dangerous.
I believe our lack of understanding of thoracic mobility has caused us to try to gain lumbar rotary ROM and this is a huge mistake. So let's get back to lifting.
The lesson here is, never, and I mean never use any kind of rotary torso machine. Eliminate all the trunk twists, Scorpions, etc. that you do to "warm-up" your low back. As McGill says, "Spare the spine."
All this talk over the past ten years has been about core stability, not core mobility. The lumbar spine needs to be stable, not mobile. Squat tall with the bar high; deadlift with a flat back. If you have a history of low back pain, go single leg.

Thoracic Spine (Mobility)
The thoracic spine is the area about which we seem to know least. Many physical therapists seem to recommend increasing thoracic mobility, though few seem to have exercises designed specifically for thoracic mobility.
The approach seems to be "we know you need it, but we're not sure how to get it." I think over the next few years we'll see an increase in exercises designed to increase thoracic mobility. Interestingly enough in SAHRMAN Diagnosis and Treatment of Movement Impairment Syndromes, physical therapist Shirley Sahrmann advocated the development of thoracic mobility and the limitation of lumbar mobility.
We've added a simple thoracic spine mobility drill to our warm-up to try to get the thoracic vertebrae to regain lost motion.
From a lifters point of view, thoracic mobility may seem less important, but if you suffer from low back pain or from neck pain, thoracic mobility work will spare both the lumbar and cervical spine.

The Scapulo-Thoracic Joint (Stability)
As we continue up the kinetic chain, we get to the scapulo-thoracic joint, which is the transfer station to the upper body. This is the interface of the shoulder blade and torso and also the key to a healthy shoulder.
Logic dictates that this is a joint that needs stability. As a lifter, this is the key to the health of the rotator cuff. As we all know, our fascination with supine pressing has made rotator cuff tendonitis almost a badge of honor in the lifting world.
Charles Poliquin has frequently talked about lower trapezius strength and its relationship to shoulder health. Bottom line. The scapulo-thoracic joint is usually weak and under worked. Most strength athletes don't do nearly enough back work and, rarely do mid-back work like rows.
If they do row, they like the bent row, which often compromises the lumbar spine as it attempts to work the scapula stabilizers. Most, if not all, lifters need more rows for the scapulo-thoracic joint as well as isolated exercises for the scapula-thoracic joint.
Low trap raises as well as exercises that have become know as Y's, T's, W's, and L's or U's all directly target the scapula stabilizers
Take a quick test. Try a max set of inverted rows.
Can you do 10? Most "strong" guys can't get 10 reps where they touch their chest to the bar without cheating. As soon as they fail they immediately go into the excuse book. Excuse one is that their incredible size keeps them from touching their chest to the bar.
My next question. Why does your incredible size allow you to bench? That's when they usually just shut up and acknowledge their weakness. Work to stabilize the scapula and at the same time, to develop the strength of the retractors like the rhomboids and lower traps. Just because you can't see them in the mirror doesn't mean they're not important.

The Shoulder
The gleno-humeral joint is similar to the hip. The gleno-humeral joint is designed for mobility yet frequently becomes immobile.
The shoulder is a complex system in that the gleno-humeral joint is strongly interrelated with the scapulo-thoracic joint. I like the "You can't shoot a cannon from a canoe" analogy here.
The scapulo-thoracic joint is the stable base that allows a mobile shoulder to work. We need to be able to lock the shoulders in place in a retracted and depressed position with the scapula stabilizers for the gleno-humeral joint to function properly.
The bottom line is that a stable shoulder complex will make for a healthy shoulder complex. The best exercise to feed this interrelationship is what we call Wall Slides. Wall slides can best be described as an active range of motion exercise for the gleno-humeral joint, combined with a stability exercise for the scapulo-thoracic joint.
The key to the Wall Slide is that the shoulder blades remain retracted and depressed while the gleno-humeral joint attempts to move the arms overhead. They are the "air guitar" of overhead pressing.
Many beginners will actually cramp in the lower trap/ rhomboid area as they attempt this exercise. The key is that the forearms must slide up in contact with the wall while the shoulder blades stay down and back.
Don't be surprised if you can't do it. It'll take some time. Only lift the arms overhead as far as pain free ROM allows. Initially this may be a small range, but trust me, it'll improve.
From a lifter's standpoint, the important take-away is that good shoulder health is all about what you can't see. I think most lifters should stay away from heavy overhead work until they master the wall slide.
I also think the need for a combination of stability and mobility in the gleno-humeral joint presents a great case for exercises like Stability Ball and BOSU Push-ups as well as unilateral dumbbell work.
The inability of joints to function normally places stress on the joints above or below. In the book Ultra Prevention (actually a great nutrition book, too), the authors describe our current method of reaction to injury perfectly. Their analogy is simple; our response to injury is like hearing the smoke detector go off and running to pull out the battery.
The pain, like the sound, is a warning of some other problem. Icing a sore knee without examining the ankle or hip is like pulling the battery out of the smoke detector.
What we need to realize is that "We get old too soon and smart too late." Oscar Wilde said, "I am not young enough to know everything."
Every day, I learn more and more about the body. What I learn allows me to be a better coach and a better educator. Often, what I learn contradicts what I formerly believed. Just remember, the world was once thought to be flat.