вторник, 30 декабря 2014 г.

Упражнение на укрепление плечевого сустава

 

Упражнение на укрепление мышц № 1. Поднимание руки в сторону.

Медленно поднимайте руку. Большой палец должен быть направлен вверх, плечо приведено кпереди на 30º. Не следует поднимать руку выше горизонтального положения.
В верхней точке задержитесь на 2 секунды, положите здоровую руку сверху на локоть или предплечье поднятой руки. Здоровой рукой осуществляете давление вниз, вторую руку медленно опускайте, сопротивляясь давлению.
Начиная выполнять упражнение, не используйте грузы. По мере достижения эффекта можно использовать небольшой груз весом от 0.5 до 1 кг.

Упражнения на укрепление мышц № 2 и № 3. Сгибание и разгибание.

Упражнения схожи за исключением направления, в котором прикладываются усилия.
Сгибание: Встаньте лицом к стене так, чтобы кончики пальцев ног касались стены. Согните больную руку в локте на угол 90º и сожмите кисть в кулак. Надавите на стену с силой, которая составляет от 25% до 50% ваших возможностей. Сохраняйте давление в течение 5 секунд.
Разгибание: Упражнение выполняется аналогично, при этом необходимо вплотную встать спиной к стене и осуществлять давление локтем.

Упражнение на укрепление мышц № 4. Внутренняя ротация

Привяжите резиновый экспандер или жгут к неподвижному предмету (дверной ручке).
Согните больную руку в локтевом суставе и прижмите свернутое полотенце локтем к телу.
Встаньте к стене боком так, чтобы больная рука была со стороны стены.
Возьмите в руку экспандер. Растягивая экспандер, прижимайте кисть к животу. Следите, чтобы локоть постоянно удерживал полотенце.
При выполнении упражнения кулак никогда не должен оказываться кнаружи от подмышечной впадины с той же стороны.

Упражнение на укрепление мышц № 5. Наружная ротация



Привяжите резиновый экспандер или жгут к неподвижному предмету (дверной ручке).
Согните больную руку в локтевом суставе и прижмите свернутое полотенце локтем к телу. Кисть прижмите к животу
Встаньте к стене боком так, чтобы со стороны стены оказалась здоровая рука.
Возьмите в руку экспандер. Растягивая экспандер, разворачивайте руку кнаружи. Следите, чтобы локоть постоянно удерживал полотенце.
В крайнем положении кулак должен оказываться на уровне подмышечной впадины с той же стороны. Избегайте чрезмерного разворота руки.

Crush Your Chest:


500 Rep Chest Workout



The Texas Method

The-texas-method
Here's what you need to know...
  • Novice lifters are able to make rapid strength gains with simple training and linear progression.
  • The more experienced a lifter becomes, the slower his progress. Optimal programming with adequate rest can enable a more seasoned lifter to continue making progress.
  • The Texas Method balances the stress of increased weight and varied volume with adequate recovery time so that intermediate lifters will progress for an extended period of time.
  • The Texas Method consists of three days a week: Mondays are high volume, Wednesdays are active recovery, and Fridays are high intensity.

Youth And Strength Programing

There are many advantages to being a young man. The problem is that if you're young, you don't know it, and probably won't know it until it's too late to do anything about it.
If I could go back and do it over again, there are several things I'd do differently. I'd spend more time on my calculus homework. I'd drink better beer. I'd spend less time trying to date more women and more time trying to get other things accomplished.
And I'd apply a few simple things I've since learned about training to my own program.
It's obvious now, 35 years removed, that I didn't take advantage of the simple ability a young man has to physically stress himself hard, recover from it relatively easily, and then stress himself again – thus rapidly accumulating the effects of training and recovery in a somewhat linear fashion.
If I had this wisdom back then, I'd have just done a simple program of squats, benches, overhead presses, deadlifts, and cleans, going up a little bit every time I trained, three days per week, until I was much bigger and stronger, or until doing so quit working.
In other words, I would've used the program outlined in my book, Starting Strength, for as long as it delivered consistent, significant results. Please keep in mind that I'm not going to describe a program for beginners in this article; quite the contrary, it's for intermediate to advanced lifters.
However, I need to make some points from Starting Strength.

The Novice Effect

Squat
Young men adapt quickly if they're stressed, fed, and rested enough. I learned this simple programming fact from running a gym for decades, showing everybody how to use the barbell exercises and watching what happened to them.
It's called the novice effect: guys who've started out with a simple program, approached it diligently and intelligently, and have gained 30-40 pounds of useful body weight in just a few months while more than doubling their strength and power.

The Novice Effect In Action

The driving force behind the power of the novice effect is simplicity. Trainees added 10 pounds at first, and then 5 pounds to their squat and deadlift every time they trained the exercise.
Similarly, they added 5 pounds at first, and then 1, 2, or 3 pounds to their bench press, overhead press, and power clean every time they trained the exercise.
They didn't do much else in the beginning – no other exercises except chin-ups and maybe some curls. They didn't run, they didn't waste time in front of the dumbbell rack, and they didn't do a bunch of sit-ups, planks or anything with a cable, wobble board, or BOSU ball.

Related:  Who Wants to Be a Novice? You Do.

But the ability to adapt this quickly and this thoroughly doesn't last long and begins to slow down the moment you start to get stronger, imperceptibly at first, and then more rapidly as you approach the limits of your capacity to recover from each increasingly difficult workout.

The Truth About Progress

Powerlifter at Rest
The rotten, irritating, sorry-ass fact is that as you approach your genetically predetermined physical limitations, it becomes harder to make progress. This is the principle of diminishing returns and we observe this throughout nature and throughout our lives.
The first improvements are easy and cheap, and the more improvement you want, the longer it takes and the more it costs. But if you don't take advantage of the opportunity while you have it, you leave things undone, and perhaps undoable later.
Let's say that you were wise enough to take advantage of your youth and put in five good months of simple linear progression.
You ignored the fools who told you that undulating periodization was the way to go, and you made the best, most rapid, and most important progress you'll ever make in the weight room, and now you're committed enough to the potential of barbell training that you're willing to do the hard work that comes next.

What's Next?

Next comes more progress, of course, but at a slower pace.
You're now strong enough that each workout represents a stress that takes longer to recover from. You're lifting weights that are heavy enough that your increases in load take place every week instead of every workout, three times per week.
This means that progress is one-third the pace it was previously; it also means that it has the potential to occur for a longer period of time, if you're diligent.
Balancing the higher stress of the increasing loads is the fact that not only has your strength improved, but your ability to recover has improved with it so that you can use more tonnage at a higher intensity.
The fact is, it's necessary to subject the body to increasing amounts of stress at a level that challenges recovery ability so that the adaptations continue to occur. But since these are now higher-intensity efforts that more fully tax the system, they require longer periods of recovery.
If we design the program correctly, we can plan workouts that place optimum stress in the optimum pattern to continue the adaptive drive of the program for a long time: A high level of tonnage-stress early in the week, a lighter workout in the middle to aid in recovery, "active rest" it's sometimes called, and then a higher-intensity lower-volume workout at the end of the week.
Stresses of different types and adequate recovery from the stress are in balance if the program is to work for an extended period of time. We call the program The Texas Method, because we are in Texas and it's a Method – a very good one that has proven itself for years.

The Texas Method

In its basic form, the workout consists of a volume day for the major lifts on Monday, a lighter recovery or variety day on Wednesday, and a high-intensity day on Friday for the major lifts. The days can obviously vary based on your schedule, but the pattern of rest days and work days is important.

Monday: Volume Day

A. Squat 5 x 5 @ 90% of 5RM
B. Bench Press or Overhead Press 5 x 5 @ 90% 5RM
C. Deadlift 1 x 5 @ 90% 5RM
Volume 5: Sets of 5 reps across (the same weight repeated for the work sets) has proven to be the optimum combination of volume and intensity.
Higher reps require a weight that's simply too light, while lower reps with a heavier weight don't have optimum volume and cause too much structural stress. Many people have tweaked the sets and reps, and time after time they come back to 5 sets of 5 across as the best driver of long-term progress.
Load: The weight should be such that all five sets of all five reps can be finished without more than 8-10 minutes rest between sets. For most people, this works out to about 90% of 5RM.
For example, if your 5-rep max squat is 345, then 315 x 5 x 5 would be Monday's squat workout. The bench press and the overhead press respond this way also – alternate between one exercise and the other each Monday for 5 x 5 with about 90% of 5RM.

Related:  When it Comes to Squats, Easier Doesn't Work

However, deadlifts are another story. There is no volume day for deadlifts, because deadlifts are too hard. You can't recover from them if you do more than one heavy set. This is especially true if you're doing 5 x 5 squats, too.
Experience with this has shown that it's best to do just one heavy set of five deadlifts on Monday, after squats and benches or overhead presses are finished. It won't be a "true" 5RM, since it follows all the squat work, but it should increase every week.
For those of you keeping score, this makes Monday a real bastard of a workout, and that's the point. It sets up the rest of the week for recovery and a focus on intensity in Friday's workout.
Assistance Work: If it were up to me, I'd limit any assistance exercises to some brief arm work on Monday. I'd also limit any excessive weekend frivolity that might affect the workout, like staying up all night Saturday chasing pussy with your wingman, Jim Beam.
Recovery: It should start right after the last set of the workout. At this level of training intensity, it's imperative that you eat and sleep with both sufficient quality and quantity – The Texas Method will overtrain your ass very quickly if you don't pay attention to recovery.
Remember: You don't get big and strong from lifting weights – you get big and strong from recovering from lifting weights. Don't fail to pay attention to this, or Monday's workout will murder the rest of the week and you'll get stuck.

Wednesday: Recovery Day

A. Squat 2 x 5 @ 80% of Monday's work weight
B. Overhead Press (if you bench pressed Monday) 3 x 5 * or
       Bench Press (if OHP on Monday) 3 x 5 @ 90% previous 5 x 5 weight
C. Chin-up 3 x Bodyweight
D. Back Extension or Glute-Ham Raise 5 x 10
* at slightly lighter load than previous OHP weight
Recovery continues with Wednesday's workout. Squats are 80% of Monday's work weight for 2 sets of 5.
Benches and overhead presses alternate: If you did overhead presses on Monday for 5 x 5, benches are done Wednesday with 3 sets of a little lighter weight than the last 5 x 5 bench press so that you can feel the load but not so much that it taps into recovery.
Recovery day overhead presses done on Wednesday are a little heavier, relative to 5RM, than the recovery-day benches, since their absolute load is lighter anyway.
Finish the workout with chin-ups and back extensions. I like 3 sets to failure for chins, with five minutes between sets, and 5 sets of 10 back extensions or glute/ham raises.

Friday: Intensity Day

A. Squat: warm-up, then work up to one single, new 5RM
B. Bench Press, (if you bench pressed Monday) or
       Overhead Press (if OHP on Monday): work up to one single, new 5RM
C. Power Clean or Power Snatch: 5 x 3 / 6 x 2
Friday is intensity day. It focuses the tonnage from Monday into a new 5RM, or within 2% of it to allow for training-quality technique.
Do most of your warm-up work light, first with the empty bar and then 135, and then take doubles or singles up to your one work set, the one that should give you a new 5RM.
Make sure that the load is higher than Monday but not so much that form breaks down on the last reps. If it does, you picked the wrong weight.

Friday Options

Since deadlifts were done on Monday, Friday is power clean/power snatch day. The Olympic lifts are the best way to train explosiveness and athleticism under the bar, while allowing you to increase your power in a way that's incrementally programmable.
Dynamic Effort work has become popular as another way to do this, and using explosive deadlifts on Friday would be a way to incorporate DE into the Texas Method, but the Olympic weightlifting-derived power clean and power snatch represents a different level of neuromuscular activity.
Keep in mind that deadlifts are pulled fast because you want to pull them fast; power cleans are pulled fast because you have to pull them fast or they won't rack on the shoulders.
The explosive aspect of a clean is actually minimal since the explosion is inherent in the top of the movement. Cleans and snatches are both lighter and more powerful than deadlifts, and thus are perfect for the Friday workout.

Related:  The Fallacy of High Rep Olympic Lifting

If you want to call yourself a lifter, you need to know how to clean and snatch, even if you don't intend to compete in Olympic weightlifting. After your warm up, do power cleans for 5 sets of 3 reps across, or power snatches for 6 doubles.

Some Notes

Deadlift
• The Texas Method is still very simple in terms of the number of exercises. Actual progress in the weight room is based on an increase in the loading of the basic structural exercises, not in the number of different ways you can perform a triceps press down.
Very few successful lifters or bodybuilders confuse complexity with effectiveness.
• The size and strength gains you'll see on the Texas Method will not be as dramatic as those seen in the novice progression outlined in the introduction because of the fact that the easy gains have already happened. We're further along on the curve here, or we wouldn't be using an intermediate-level program.
If five months of novice progression took you from a 95-pound squat at a bodyweight of 140 to a 315 x 5 squat at a bodyweight of 200, the Texas Method will take you to 405 x 5 squat at a bodyweight of 225 in a year. Not as dramatic by any stretch, but this is fine because you're older now and committed to the project.

A Rap Upside the Head

Your time spent in the gym can be either productive or wasted, and a few seconds spent thinking about this will yield the conclusion that any real progress is a quantifiable improvement in strength.
Strength gains are the basis of an increase in size. In effect, size is a side effect of strength, and an intelligently designed and applied program can drive strength. At any point in your training career, quantifiable progress must be your objective.
It's easy at first when you're a novice to the barbell. The Texas Method is a good way to carry you through the next step: maintaining the trend of handling increasingly heavy weight.
The Texas Method doesn't work forever. Nothing does. But it does work well as your introduction to the more complicated programming necessary to continue strength and size gains into the more advanced stages of strength training.

понедельник, 29 декабря 2014 г.

The Shoulder W Exercise

http://www.mikereinold.com/2011/04/the-shoulder-w-exercise.html



Shoulder W ExerciseLast week I wrote an article on what I considered essential exercises to add to every program, which included the shoulder W exercise for external rotation.  I received a lot of feedback from that article and many requests to post a video describing the technique.  Although, this is a pretty simple exercise, there are some tips I can share to help you maximize the exercise.

Why I Like the Shoulder W Exercise

Like I mentioned in my previous article, I have been a fan of the shoulder W exercise for some time now.  If you’ve watched my DVD Optimal Shoulder Performance, you know what I mean.  The exercise combines shoulder external rotation with scapular retraction and posterior tilt, definitely a great combo and advantageous for many people as it recruits the posterior rotator cuff (infraspinatus and teres minor) and the lower trapezius.
A study by McCabe et al (NAJSPT 2007) demonstrated that the shoulder W exercise exhibited a moderate amount of posterior rotator cuff and lower trapezius EMG activity.  But more notable for me was the finding that this exercise produced minimal upper trapezius activity and the highest ration of lower trapezius to upper trapezius activity.  I’ve written about how the upper trapezius can affect shoulder function and how upper trapezius and lower trapezius imbalances may cause shoulder impingement, so you know how much I am going to like an exercise that really emphasizes the lower trap and posterior rotator cuff!

Shoulder W Exercise Video Demonstration

In the video demonstration of the shoulder W exercise below, notice that I grasp a good piece of Theraband about shoulder width apart and hold with my thumbs up.  I’ve seen many people recommend that you point your thumbs back, I don’t really think that supinating your forearm changes the exercise so I’d rather keep the forearm in neutral and really just focus on the shoulder and scapula.
The other tidbit I would recommend, and the origin of the name “W” exercise, is that I like to keep a 90 degree angle at the elbow, which ends up form a “W” when you reach end range of external rotation.  This happens because the lat muscle mass causes your arms to abduct a little bit of your body.  I wouldn’t recommend trying to keep your forearms parallel to the ground.
If you perform the shoulder W exercise with thumbs back and keep your forearms parallel to the ground (and thus don’t form a “W”) I feel that you are really missing out on the scapula retraction and more importantly, the scapular posterior tilt that you achieve when forming a “W.”  Try it yourself, you’ll feel what I mean.

Realize that this isn’t rocket science here, there are several variations of bilateral shoulder external rotation exercises, but I wanted to share my thoughts on performing the shoulder W exercise and why I prefer it, what do you think?

Rotator Cuff Fatigue Increases Superior Humeral Head Migration

http://www.mikereinold.com/2011/04/rotator-cuff-fatigue-increases-superior-humeral-head-migration.html



shoulder impingementIf there is one thing that I would say is the most important concept to understand regarding the shoulder, it is simply that you can not work the rotator cuff to failure as rotator cuff fatigue causes superior humeral head migration and subacromial impingement.  That is it, I just summarized the role of the rotator cuff in one sentence, albeit a long sentence!
I talk about this concept all the time including a past post on humeral head biomechanics after rotator cuff fatigue, my Optimal Shoulder Performance DVD with Eric Cressey, as well as an entire week on rotator cuff injuries in my online shoulder CEU program.  Yet, I still read and see people performing exercises designed to “burn out” the cuff, or build endurance my “working the cuff to failure.”
This doesn’t work.  You can not work the rotator cuff to failure.

Rotator Cuff Fatigue Increases Superior Humeral Head Migration

Another recent study by Jaclyn Chopp from the Journal of Shoulder Elbow Surgery again contributes evidence to this concept.  The study examined the amount of superior humeral head migration during arm elevation in the scapular plane before and after fatiguing the rotator cuff.  The examiners fatigued the rotator cuff by performing a repetitive overhead lifting task that involved lifting an object in the following fashion:
  • Lifting an object from 45 degrees to 135 degrees of sagittal plane elevation
  • Then, slowly lowering the object in the same plane
  • Then, externally rotating the arm and lifting in the coronal plane
  • Then, slowly lowering the object again and internally rotating back into the original start position
  • Lastly, they also performed 5 second static holds at 90 degrees abduction with the same weight every minute.
As you can see, I like their fatigue protocol as it combines flexion, abduction, external rotation, and internal rotation of the shoulder, plus they threw in the commonly performed static hold at 90 degrees abduction.  The weight they lifted was 15% of their maximal lift, so certainly not that heavy and a good replication of a functional activity.
In the pre-fatigued state, the shoulder demonstrated normal biomechanics of a mild amount of superior humeral head migration that eventually stopped and centered the humeral head within the glenoid fossa.  This is normal, as the humeral head actually sits inferior to the center of the glenoid in the resting position, likely due to gravity.  So, you can see in the table below that the humeral head rises up a little and then actually migrated inferiorly as the arm is elevated.
In the fatigued state, the humeral head continued to migrated superiorly and never started to move inferiorly, effectively decreasing the subacromial space and potentially leading to shoulder impingement.
rotator cuff fatigue
superior humeral head migration

More evidence indeed to support the concept that the rotator cuff is so important in providing dynamic stability of the shoulder, even during simple tasks, that you can not work it to failure.  So think of this next time you want to attempt to work the cuff to failure. Doing so will increase superior humeral head migration and increase subacromial impingement.  So after that exercise, every time you pick up your arm for the rest of the day, you are causing some subacromial impingement.
So consider this a call to action, stop working the cuff to failure or performing burn out sets for the rotator cuff (and the back too, but that is another post…).  These muscles don’t work this way.  I continue to stick to sets of 10 repetitions for shoulder exercises.  I am also very careful when trying to build endurance in the rotator cuff, assuring that the person’s overall shoulder workload is not too high when focusing on endurance.
Click here to see more about how I rehabilitation rotator cuff repair patients and download free copy of my arthroscopic rotator cuff repair protocol.
The last thing you want to do is cause rotator cuff fatigue, superior humeral head migration, or subacromial impingement.

TRX Serratus Slide


serratus anteriorThe serratus anterior is an extremely important muscle that helps control normal shoulder and scapular function by protracting and upwardly rotating the scapula. In addition, the serratus assists in stabilizing the scapula against the rib cage, preventing scapular winging. These are all critical functions of the serratus that help prevent shoulder impingement.
Because the serratus is so important in functional arm movements, exercises to strengthen and enhance neuromuscular control of the serratus should be incorporate into many training and rehabilitation programs, especially in those with shoulder dysfunction.
While traditional protraction exercises have been effective in strengthening the serratus, recent research has identified that serratus activity is increased when combining both protraction and upward rotation of the scapula (Ekstrom et al JOSPT 2003). This movement helps train the serratus in a functional pattern that combines the muscle’s several important roles in scapular mobility.
Based on this research, I began using a dynamic jab exercise as baseline exercises for basic training and rehabilitation of the serratus (Reinold et al JOSPT 2009).  I discussed this and other techniques in training the serratus in my webinar that you receive free for signing up for my newsletter, so check that out if you haven’t already.
However, this exercise is quickly mastered and further challenge is often required. Incorporating a closed kinetic chain position and unstable surface training will require a greater degree of dynamic stability of the scapula and promote neuromuscular control. Thus, I began incorporating the TRX Suspension Trainer to further advance the exercise.

The TRX Serratus Slide

The TRX Suspension Trainer is an excellent method of performing the Serratus Slide movement that challenges both the strength and stabilizing functions of the serratus muscle. Furthermore, the amount of challenge can quickly be adjusted by modifying the angle of the exercise.
TRX Suspension Trainer Serratus Slide
This picture doesn’t do the exercise justice, it is really all about the movement.  TRX recently featured this exercise on their website with a video demonstration, so check it out at the below link:
I really have found a bunch of great uses for the TRX Suspension Trainer, and this is just one example.  I am going to keep sharing some of the exercises that I incorporate the TRX straps.
Also, I just recently got my hands on the new TRX Rip Trainer, this thing is pretty cool, I have started to use this a lot in my programs, specifically for some of the exercises in my Functional Stability Training system, they work great for enhancing core stability.

A New Exercise for Strength and Stability of the Shoulder

http://www.mikereinold.com/2014/12/a-new-exercise-for-strength-and-stability-of-the-shoulder.html


There is not doubt that we need a strong and stable shoulder to maximize performance.  I recently started playing with a new device called The Pronator.  It’s a device designed to strengthen the forearm musculature.  Honestly, this little thing is a fantastic device for grip and forearm strength, but I also started using it with my shoulder exercises and think this may be a game changer!
Take a look at the video below.
I see this very similar to performing bottom-up kettlebell exercises.  By having an offset weight, you need to work the shoulder in 3D to stabilize and move at the same time.  Pretty cool.  It essentially allows you to:
  • Develop stability in one plane of motion and strength in another
  • Train the cuff to fire and stabilize while moving the scapula
The PronatorThe product is brand new and very affordable at only $55.   I don’t often tell my audience that they need to buy a product, but I really think everyone should have this one.  I like it that much!
UPDATE: The maker of The Pronator, Jonathon Rosploch, just let me know that The Pronator is now $10 off through 12/24/14!